Assembly Steps
Important: Read the Installation Requirements before assembling the EFX.
Ask your assistant to hold the right stabilizer, which has the cable protruding from both ends, next to the base frame. Connect the base cable. An audible click is heard when the cable is properly attached. Place excess cable into the base frame.
Secure the stabilizer to the base frame using four hex head screws
(A) and four washers (B). Partially tighten.
Note: For easier access to the base mounts, lift the front of the
EFX off the floor and place a wedge of packaging beneath its base.
EFX5.25 Elliptical Fitness CrossTrainer Assembly Guide | 3 |