2 | Setting Up the EC850 Professional Cycle |
The EC850 Professional Cycle comes fully assembled. You simply need to | |
follow the installation requirements listed in this section and place the cycle in |
the appropriate location.
The cycle has a unique program that lets you determine which language and measurement system appears on the electronic console display. You can choose one of three languages: French, German, or English, and select either U.S. Standard or Metric as the measurement system. The Club Setting Program also enables you to limit workout time on the cycle so more people can use it. Instructions on how to use the program are found in this section.
Installation Requirements
Follow the installation requirements below when installing the cycle. If you do not install the cycle according to the following guidelines, you could void the Precor warranty.
• Set up the EC850 cycle on a solid, flat surface.
• Use the appropriate voltage outlet and grounding as specified on the cycle. The EC850 cycle is available in both
CAUTION: Do not use a
Interconnecting Cycles
You can connect up to eight EC850 cycles together in a “daisy chain” fashion which eliminates the need for additional wall outlets.
To connect the cycles together, take the following steps:
1. Locate the outlet on the front of the cycle next to the ON/OFF power switch.
2. Connect the appropriate power cord from the outlet to the next cycle in line.
Caution: Do not use the outlet located on the front of the cycle for anything other than interconnecting EC cycles. Do not connect treadmills or other electrical appliances to this outlet.
page 5