Trek 6i owner manual To set 8i wheel size, Select wheel screen

Page 16

ODO	Set
TME
AVG
MAX
TRP

Mode

Note: If you want to set a custom wheel size, go to page 24 now.

3.Cycle Mode

The Wheel Size changes.

4. Hold Set• to select.

The computer returns to current speed.

To set 8i wheel size

Figure 13- Select wheel screen

The 8i allows you to use two different wheel sizes. The icon for Wheel 1 is a small circle. The icon for Wheel 2 is a partial circle surrounding the Wheel 1 icon (Figure 13).

1.Cycle Mode to TME.

2.Hold Set•

Wheel Select icon appears on the screen.

3.Cycle Set• to show Wheel 1 or Wheel 2.

4.Push Mode to select.

The wheel size appears.

Note: If you want to set a custom wheel size, go to page 24 now.

14 Easy setup (ReSet)

Image 16

Contents Trek Incite 6i 920Contents Safety and general guidelines Watch the road when ridingFunctions Function ExplanationWheel Installation MountTo install the computer on handlebar Placing the computer on the handlebarTo install the computer on the stem Make sure the com- puter cannot be bounced offTo install the wheel magnet Placing the magnetAttaching the computer wire To attach the computer wireTo install the sensor Attaching the sensorTighten the nylon ties and trim the excess length Figure Easy setup ReSet Using the buttons SetTo set the computer To set 6i wheel sizeTo set 8i wheel size Select wheel screenCycle Mode to TRP To select the wheel for useTo set Clock Clock screenReStart- Getting ready to ride To ReStart set the Trip data to zeroChanging mode Using the computer in wet weatherAdditional information Removing the computer from the computer baseTroubleshooting Replacing the battery To replace the batteryBe careful to avoid losing the rubber O-ring seal Setting custom wheel size Selecting the custom value 4-digit numberPush Set To measure rollout for wheel size Measuring rollout for wheel sizeThis warranty covers Limited WarrantyThis warranty does not cover