Trek 8i, 6i owner manual To select the wheel for use, Cycle Mode to TRP

Page 17

ODO	Set
TME
AVG
MAX
TRP

Mode

5.Cycle Mode

The wheel size changes.

6. Hold Set• to select.

The computer returns to current speed.

To set the second wheel size, repeat the instructions, but select the other Wheel Select icon.

To select the wheel for use

1.Cycle Mode to TRP

2.Hold the left Mode and the right Mode together.

The Wheel Select icon changes (Figure 13). Repeat step 2 to change again.

Easy setup (ReSet)

15

Image 17

Contents 920 Trek Incite 6iContents Watch the road when riding Safety and general guidelinesFunction Explanation FunctionsWheel Mount InstallationPlacing the computer on the handlebar To install the computer on handlebarMake sure the com- puter cannot be bounced off To install the computer on the stemPlacing the magnet To install the wheel magnetTo attach the computer wire Attaching the computer wireAttaching the sensor To install the sensorTighten the nylon ties and trim the excess length Figure Easy setup ReSet Set Using the buttonsTo set 6i wheel size To set the computerSelect wheel screen To set 8i wheel sizeTo select the wheel for use Cycle Mode to TRPClock screen To set ClockTo ReStart set the Trip data to zero ReStart- Getting ready to rideUsing the computer in wet weather Changing modeAdditional information Removing the computer from the computer baseTroubleshooting To replace the battery Replacing the batteryBe careful to avoid losing the rubber O-ring seal Selecting the custom value 4-digit number Setting custom wheel sizePush Set Measuring rollout for wheel size To measure rollout for wheel sizeThis warranty does not cover Limited WarrantyThis warranty covers