Precor 903 specs

To check the alignment of the running belt, take the following steps:

1.Walk on the treadmill while holding onto the handrail for balance.

2.Observe the running belt for a couple minutes.

3.If the running belt tracks off center or the belt moves toward either flywheel, you need to align the belt.

Diagram 10

Turning the adjustment bolt to align the running belt.

Deck

Running belt

Rear roller

Belt adjustment bolt

Side rail

Caution: Be sure to grasp the handrail while performing this step.

CAUTION: Do not turn the adjustment bolt more than 1/2 turn at a time. Overtightening the bolt can damage the treadmill.

4.If you see that the running belt is noticeable off center, adjust the alignment of the belt using the supplied hex key on the adjustment bolts (located at the rear of the treadmill). See Diagram 10.

5.If you haven’t already done so, set the incline of the treadmill and adjust the micro-adjustment knob so that you can keep your momentum while walking on the treadmill without using the handrail. Refer to the sections, Adjusting the Elevation Tube to change the height adjustment pins and Adjusting the Resistance Level to use the micro-adjustment knob.

Important: If you notice that the belt needs alignment, make the adjust- ments at once. Failure to do so might cause the belt to tear or fray which is not covered by the limited warranty.

6.While walking on the running belt, observe (for a few minutes) how it tracks along the deck. If the running belt tracks off center or the belt moves toward the flywheel, you need to align the belt.

7.Step off the treadmill and tighten the rear adjustment bolt on the side of the treadmill that the belt tends to move toward. Turn the bolt clockwise 1/2 turn at a time.

Important: Do not stand on or move the running belt while you are turning the adjustment bolt.

8.Walk on the treadmill for a few minutes to see if the belt is tracking properly. If necessary, step off the treadmill and turn the appropriate adjustment bolt clockwise another 1/2 turn.

9.Again, walk on the treadmill for a few minutes to see if the belt is tracking properly. If it is still not tracking properly, loosen the rear adjustment bolt on the opposite side 1/2 turn counterclockwise. Do not overtighten the belt.

page 18

903 specifications

The Precor 903 is a state-of-the-art recumbent exercise bike designed to provide users with a comfortable, effective, and efficient workout experience. Its design philosophy focuses on the amalgamation of performance and user comfort, catering to both novice and experienced fitness enthusiasts.

One of the standout features of the Precor 903 is its ergonomic design. The recumbent seat is strategically angled to minimize stress on the back and joints while maximizing comfort during workouts. The adjustable backrest and seat allow users to find their optimal position, making it an ideal choice for long sessions. The wide, cushioned seat and support for the lower back ensure that users can engage in low-impact cardiovascular workouts without discomfort.

The Precor 903 is equipped with an advanced console that provides a user-friendly interface for tracking workout metrics. The high-resolution display presents essential information such as time elapsed, distance traveled, speed, calories burned, and heart rate. Integrated heart rate monitors and wireless connectivity options, including Bluetooth and ANT+, allow users to easily connect their personal fitness devices, enhancing their monitoring capabilities.

In terms of resistance, the Precor 903 features a magnetic resistance system that offers a smooth, quiet workout experience. With a range of resistance levels, users can adjust the intensity of their workouts according to their fitness levels and goals. This versatility makes it suitable for a wide demographic, from those recovering from injuries to serious cyclists looking for a challenging session.

Another notable characteristic of the Precor 903 is its durability. Crafted with high-quality materials, the bike is built to withstand regular use in both home and gym environments. The sturdy frame ensures stability even during intense workouts, while the easy-to-move design allows for convenient transportation and storage.

Additionally, the Precor 903 incorporates various workout programs designed to cater to different fitness goals. Whether users are looking to improve cardiovascular health, lose weight, or build endurance, the bike provides a range of preset workouts to keep training engaging and effective.

In conclusion, the Precor 903 recumbent exercise bike stands out for its combination of comfort, versatility, and technology. It is an excellent choice for anyone looking to enhance their fitness journey with a machine that prioritizes user experience while delivering results. Whether for home use or in a gym setting, the Precor 903 is designed to meet the needs of a diverse user base while ensuring a safe and effective workout.