ProForm 30464.0 user manual See . Tighten the M8 x 15mm Bolts 8 used in step

Page 10

10.Tighten two M8 x 15mm Bolts (8) with two M8 Star Washers (5) into the Uprights (53, 54).

See step 9. Tighten the M8 x 15mm Bolts (8) used in step 9.

With the help of a second person, carefully lower the Uprights (53, 54) to the floor.

11.Attach the ground wire on the Wire Harness (39) to the indicated hole in the Base (52) with an M4 x 10mm Screw (84).

10
8	5
	53
		54
	8	5
11
	52

Hole

Ground Wire

84

39

10

Image 10

Contents Model No Serial No QUESTIONS?Call TOLL-FREE Table of Contents Important Precautions Page Before YOU Begin Assembly Make sure that the power cord is unpluggedHold the Left Upright 53 so the two small Holes for the latch assembly are on top asSee the upper inset drawing. Locate the wire Washers 9. Do not tighten the Bolts yetWasher 9 do not tighten the Bolt yet See the left inset drawing. Identify the twoOuter side of the Frame Spacer facing Right Upright See the left inset drawing. Identify the outerBe Damaged When the Power is Nected PROPERLY, the Console MAYSee . Tighten the M8 x 15mm Bolts 8 used in step Top View HOW to Plug in the Power Cord Operation and AdjustmentPRE-LUBRICATED Walking Belt Console Diagram Features of the ConsoleHOW to Turn on the Power HOW to USE the Manual ModeUpper display HOW to USE a Preset Workout Select one of the four preset workoutsThat the audio wire is fully plugged HOW to USE the Stereo Sound SystemInformation Mode HOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Fold the Treadmill for Storage HOW to Lower the Treadmill for USETroubleshooting Problem The power turns off during useProblem The walking belt slows when walked on Top View Workout Guidelines Exercise GuidelinesExercise Intensity Exercise FrequencyR1207A Qty DescriptionQty Explodeddrawing Exploded Drawing B-Model No Exploded Drawing C-Model No Exploded Drawing D-Model No Ordering Replacement Parts Limited Warranty