ProForm 30464.0 user manual

Page 4

20.Never leave the treadmill unattended while it is running. Always remove the key, unplug the power cord, and switch the reset/off cir- cuit breaker to the off position when the treadmill is not in use. (See the drawing on page 5 for the location of the circuit breaker.)

21.Do not attempt to raise, lower, or move the treadmill until it is properly assembled. (See ASSEMBLY on page 6 and HOW TO FOLD AND MOVE THE TREADMILL on page 18.) You must be able to safely lift 45 lbs. (20 kg) to raise, lower, or move the treadmill.

22.When folding or moving the treadmill, make sure that the frame is held securely in the storage position.

23.Do not change the incline of the treadmill by placing objects under the treadmill.

24.Inspect and properly tighten all parts of the treadmill regularly.

25.Never drop or insert any object into any opening on the treadmill.

26.This treadmill is intended for in-home use only. Do not use this treadmill in a commer- cial, rental, or institutional setting.

27.DANGER: Always unplug the power cord immediately after use, before cleaning the treadmill, and before performing the main- tenance and adjustment procedures de- scribed in this manual. Never remove the motor hood unless instructed to do so by an authorized service representative. Servicing other than the procedures in this manual should be performed by an authorized service representative only.

SAVE THESE INSTRUCTIONS

4

Image 4
Contents Model No Serial No QUESTIONS?Call TOLL-FREE Table of Contents Important Precautions Page Before YOU Begin Assembly Make sure that the power cord is unpluggedHoles for the latch assembly are on top as See the upper inset drawing. Locate the wireHold the Left Upright 53 so the two small Washers 9. Do not tighten the Bolts yetSee the left inset drawing. Identify the two Outer side of the Frame Spacer facing Right UprightWasher 9 do not tighten the Bolt yet See the left inset drawing. Identify the outerBe Damaged When the Power is Nected PROPERLY, the Console MAYSee . Tighten the M8 x 15mm Bolts 8 used in step Top View HOW to Plug in the Power Cord Operation and AdjustmentPRE-LUBRICATED Walking Belt Console Diagram Features of the ConsoleHOW to Turn on the Power HOW to USE the Manual ModeUpper display HOW to USE a Preset Workout Select one of the four preset workoutsThat the audio wire is fully plugged HOW to USE the Stereo Sound SystemInformation Mode HOW to Fold and Move the Treadmill HOW to Fold the Treadmill for StorageHOW to Move the Treadmill HOW to Lower the Treadmill for USETroubleshooting Problem The power turns off during useProblem The walking belt slows when walked on Top View Exercise Guidelines Exercise IntensityWorkout Guidelines Exercise FrequencyR1207A Qty DescriptionQty Explodeddrawing Exploded Drawing B-Model No Exploded Drawing C-Model No Exploded Drawing D-Model No Ordering Replacement Parts Limited Warranty