ProForm PCTL04509.0 manual Save the Crossbar and the two Screws for steps 11

Page 11

10.Set the console assembly face down on a soft surface to avoid scratching the console assem- bly.

Remove the two #8 x 1/2" Screws (2) from the Crossbar (106), and then remove the Crossbar.

Save the Crossbar and the two Screws for steps 11 and 14.

11.Attach the Crossbar (106) to the Right and Left Handrails (104, 107) with two 1/4" x 3/4" Bolts (10) and two 1/4" Star Washers (14). Do not tighten the Bolts yet.

10		Console
	2	Assembly
	2
	106
	2

	11
		107
	14	106
	14	10
		10
		14
		10
		104

11

Image 11

Contents Contact OUR Customer SER- Vice Department Directly QUESTIONS?Model No. PCTL04509.0 Serial No Table of Contents Important Precautions Page Before YOU Begin Assembly Tighten the Nut the Wheel must turn freely Make sure that the power cord is unpluggedDo not fully fold the Frame yet Upright do not fully tighten the Bolts yet With a second Bolt Spacer 81, 3/8 x 4 Bolt 3/8 Star WasherTouch the Upright do not fully tighten Bolts yet Page Save the Crossbar and the two Screws for steps 11 Are not Connected PROPERLY, Console MAY be Damaged When YOUTurn on the Power Page PRE-LUBRICATED Walking Belt Operation and AdjustmentHOW to Plug in the Power Cord Features of the Console Console DiagramInsert the key into the console HOW to Turn on the PowerHOW to USE the Manual Mode Measure your heart rate if desired. Before using Monitor your progress with the matrix and the displays HOW to USE a Preset WorkoutSelect a preset workout Start the workoutHOW to USE the Stereo Sound System Information ModeHOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Lower the Treadmill for USE Compatible with GFCI-equipped outlets TroubleshootingProblem The power turns off during use Top Problem The walking belt slows when walked onProblem Solution Exercise Frequency Exercise GuidelinesExercise Intensity Workout GuidelinesKey No. Qty. Description R1109ADescription Exploded Drawing A-Model No. PCTL04509.0 R1109A Exploded Drawing B-Model No. PCTL04509.0 R1109A Exploded Drawing C-Model No. PCTL04509.0 Exploded Drawing D-Model No. PCTL04509.0 R1109A Limited Warranty Ordering Replacement Parts