ProForm PCTL04509.0 manual Touch the Upright do not fully tighten Bolts yet

5. With the help of a second person, carefully tip	5			B
the treadmill onto its right side. Partially fold the
Frame (51) so that the treadmill is more stable;	A
do not fully fold the Frame yet.
Remove and discard the indicated bolts (A) and
the shipping bracket (B).
Attach a Wheel (88) to the Base (87) with a 3/8"					7
x 2" Bolt (7) and a 3/8" Nut (11). Do not over-						51
tighten the Nut; the Wheel must turn freely.
				87	88
					11
6. Hold a Bolt Spacer (81) inside the lower end of	6
the Left Upright (75). Insert a 3/8" x 4" Bolt (9)		9
with a 3/8" Star Washer (12) into the Left				75
Upright and the Bolt Spacer. Repeat this step
with a second Bolt Spacer (81), 3/8" x 4" Bolt		12
(9), and 3/8" Star Washer (12).				86
Hold the Left Upright Spacer (86) and the Left		81
Upright (75) against the Base (87). Tighten the
3/8" x 4" Bolts (9) until the heads of the Bolts
touch the Upright; do not fully tighten the	83	81	87
Bolts yet.
Press a Base Cap (83) into the Base (87).
With the help of a second person, tip the tread-
mill so that the Base (87) is flat on the floor.
7. Slide the Left Handrail Spacer (74) and the Right	7
Handrail Spacer (78) onto the top of the Left			74
Upright (75) and the Right Upright (80).
				75		78
					80
	9