ProForm PCTL04509.0 manual HOW to Fold and Move the Treadmill, HOW to Move the Treadmill

Page 20

HOW TO FOLD AND MOVE THE TREADMILL

HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, adjust the incline to the lowest position. If you do not do this, you may damage the treadmill when you fold it. Remove the key and unplug the power cord. CAUTION: You must be able to safely lift 45 lbs. (20 kg) to raise, lower, or move the treadmill.

1.Hold the metal frame firmly in the location shown by the arrow at the right. CAUTION: To decrease the pos- sibility of injury, do not lift the frame by the plastic foot rails. Make sure to bend your legs and keep your back straight as you raise the frame. Raise the frame about halfway to the vertical position.

2.Raise the frame until the latch knob locks into the storage position. Make sure that the latch knob is locked in the storage position.

To protect the floor or carpet from damage, place a mat under the treadmill. Keep the treadmill out of di- rect sunlight. Do not leave the treadmill in the storage position in temperatures above 85° F (30° C).

HOW TO MOVE THE TREADMILL

Before moving the treadmill, convert the treadmill to the stor- age position as described above. Make sure that the latch knob is locked in the storage position.

1.Hold a handrail and the frame and place one foot against one of the wheels.

2.Tip the treadmill back until it rolls freely on the wheelsNever. Carefully move the treadmill to the desired location. move the treadmill without tipping it back. To reduce the risk of injury, use extreme caution while moving the treadmill. Do not attempt to move the treadmill over an uneven surface.

3.Place one foot against a wheel, and carefully lower the treadmill until it is resting in the storage position.

Frame

Latch Knob

Frame

Handrail

Wheel

20

Image 20
Contents Contact OUR Customer SER- Vice Department Directly QUESTIONS?Model No. PCTL04509.0 Serial No Table of Contents Important Precautions Page Before YOU Begin Assembly Tighten the Nut the Wheel must turn freely Make sure that the power cord is unpluggedDo not fully fold the Frame yet With a second Bolt Spacer 81, 3/8 x 4 Bolt 3/8 Star Washer Upright do not fully tighten the Bolts yetTouch the Upright do not fully tighten Bolts yet Page Save the Crossbar and the two Screws for steps 11 Are not Connected PROPERLY, Console MAY be Damaged When YOUTurn on the Power Page PRE-LUBRICATED Walking Belt Operation and AdjustmentHOW to Plug in the Power Cord Console Diagram Features of the ConsoleInsert the key into the console HOW to Turn on the PowerHOW to USE the Manual Mode Measure your heart rate if desired. Before using HOW to USE a Preset Workout Select a preset workoutStart the workout Monitor your progress with the matrix and the displaysInformation Mode HOW to USE the Stereo Sound SystemHOW to Fold and Move the Treadmill HOW to Move the TreadmillHOW to Lower the Treadmill for USE Compatible with GFCI-equipped outlets TroubleshootingProblem The power turns off during use Problem The walking belt slows when walked on TopProblem Solution Exercise Guidelines Exercise IntensityWorkout Guidelines Exercise FrequencyR1109A Key No. Qty. DescriptionDescription Exploded Drawing A-Model No. PCTL04509.0 R1109A Exploded Drawing B-Model No. PCTL04509.0 R1109A Exploded Drawing C-Model No. PCTL04509.0 Exploded Drawing D-Model No. PCTL04509.0 R1109A Ordering Replacement Parts Limited Warranty