JVC RX-8030VBK, RX-7030VBK manual Introduction, Features, Precautions

Page 4

Introduction

We would like to thank you for purchasing one of our JVC products.

Before operating this unit, read this manual carefully and thoroughly to obtain the best possible performance

from your unit, and retain this manual for future reference.

Features

CC(Compensative Compression) converter

ONLY for RX-8030VBK

CC Converter eliminates jitter and ripples, achieving a drastic reduction in digital distortion by processing the digital music data in 24 bit–quantization and by expanding the sampling frequency to 128 kHz (for fs 32 kHz signals)/176.4 kHz (for fs 44.1 kHz signals)/192 kHz (for fs 48 kHz signals). By using the CC Converter, you can obtain a natural sound field from any source. (See page 21 for details.)

K2 technology—ONLY for RX-8030VBK

K2 technology has been designed to enable natural audio reproduction, achieving a drastic reduction in digital distortion and creating original sound ambience with high precision.

Compatible with various audio formats including DTS 96/24

RX-8030VBK and RX-7030VBK/RX-7032VSL allow you to enjoy a newly introduced audio format such as Dolby Digital EX, Dolby Pro Logic II, DTS-ES, DTS Neo:6, and DTS 96/24.

This unit is also compatible with Dual Mono signals recorded in Dolby Digital and DTS discs.

DAP (Digital Acoustic Processor)

Sound field simulation technology allows precise ambience recreation of existing theaters and halls. Thanks to the high- performance DSP (Digital Signal Processor) and high-capacity memory, you can enjoy multi-channel surround sound by playing 2-channel or multi-channel software according to the speaker setting.

Precautions

Power sources

When unplugging the receiver from the wall outlet, always pull the plug, not the AC power cord.

Do not handle the AC power cord with wet hands.

If you are not going to operate the receiver for an extended period of time, unplug the AC power cord from the wall outlet.

Ventilation

High power amplifiers built in this receiver will generate heat inside the cabinet. For safety, observe the following carefully.

Make sure there is good ventilation around the receiver. Poor ventilation could overheat and damage the receiver.

Do not block the ventilation openings or holes. (If the ventilation openings or holes are blocked by a newspaper or cloth, etc., the heat may not be able to get out.)

Others

Should any metallic object or liquid fall onto the unit, unplug the unit and consult your dealer before operating any further.

Do not expose this apparatus to rain, moisture, dripping or splashing and that no objects filled with liquids, such as vases shall be placed on the apparatus.

Do not disassemble the unit since there are no user serviceable parts inside.

If anything goes wrong, unplug the AC power cord and consult your JVC dealer.

Multi-channel headphone virtual surround sound—3D HEADPHONE Mode

The built-in headphone virtual surround system is compatible with Multi-channel software like Dolby Digital, DTS Surround, etc. Thanks to the new signal processing algorithms used by the high- performance DSP, you can enjoy a natural surround sound through the headphones.

COMPU LINK/AV COMPU LINK remote control systems

These COMPU LINK remote control systems allow you to operate other JVC’s audio/video components from this receiver.

2

Image 4
Contents RX-8030VBK RX-7030VBK/RX-7032VSL For RX-8030VBKMises en garde, précautions et indications diverses Table of Contents Precautions FeaturesIntroduction Remote Control Parts IdentificationFront Panel How to open the front doorDisplay Window DVD MULTI, DVD, VCR 1, VCR 2, Video For RX-7030VBK/RX-7032VSL Bass Boost button and lampRear Panel RX-8030VBKRemote Control RX-8030VBKRX-7030VBK RX-7032VSLBefore Installation Connecting the FM and AM AntennasChecking the Supplied Accessories Putting Batteries in the Remote ControlInsert the speaker signal cable Connecting the SpeakersBasic connecting procedure Close the speaker terminalPlacing speakers Connecting the subwoofer speakerRight / Left Connecting Audio/Video Components Enhancing your audio systemOnly for RX-8030VBK Analog ConnectionsCD player CD recorderFor RX-8030VBK Cassette deckWhen using the digital input terminal MD recorderVideo component connections If your video components have an AV Compulink jackVCRs To audio input To audio output Ç To S-video outputRX-8030VBK To S-video input To composite video input TV and/or DBS tunerDVD player RX-8030VBK RX-7030VBK/RX-7032VSLDVD player To listen to the sound after connection, press DVD MultiConnecting the Power Cord Plug the power cord into an AC outletDigital Connections Digital output terminalTurning On the Power Daily Operational Procedure Selecting the Source to PlayBasic Operations Adjusting the Volume Speaker and signal indicators on the displaySelecting different sources for picture and sound On the unitSelecting the Analog or Digital Input Mode Listening with headphones onlyTo use the speakers connected to the Front Speakers On the nextSetting the Dynamic Range To select the analog input mode againPress Analog Direct so that a Direct appears on the display Press TV SOUND/DBSPress CC Converter so that the lamp on the button lights up Press TAPE/MDUsing the Sleep Timer Reinforcing the BassMuting the Sound Changing the Display BrightnessTuning in to Stations Manually Using Preset Tuning To store the preset stationsReceiving Radio Broadcasts Press FM or AM to select the bandSelecting the FM Reception Mode While listening to an FM station, press FM ModePress the 10 keys to select a preset channel number To tune in a preset stationBasic Settings Setting the Speakers Configuration RemotePress Quick Speaker Setup Press in Multi JOG Push SETBasic Setting Items Speakers channels number and the sizeRoom size and the speaker distance Items To do SeeBasic Procedure Press SettingSetting the Speakers Push in Multi JOG Push SETSetting the Bass Sounds Setting the Speaker DistanceSelect one of the following Selecting main or sub channel-DUAL Mono Setting the Digital Input TerminalsSelect the playback sounds channel Setting the Component Video Input Memorizing the Volume Level for Each SourceTo recall the volume level To cancel the One Touch OperationAdjusting Sound Basic Setting Items Basic ProcedurePress Adjust Ex. When adjusting the subwoofer level toAdjusting the Equalization Patterns Adjusting the Speaker Output LevelsEqualization adjustment-DIGITAL EQ Repeat steps 2 and 3 to adjust the other center frequencySelect a speaker you want to adjust Adjustable parametersFor DAP modes For Pro Logic II Music onlyUsing the Surround Modes Reproducing Theater Ambience Introducing the Surround ModesWhat is Dual Mono? DTS Digital SurroundDTS Extended Surround DTS-ES DTS 96/24Incoming Signal Type EX/ES Setting Available Surround ModeSurround Modes Applicable to the Various Software 3D Headphone Mode-3D H PhoneActivating the Surround Modes Press Surround to activate the Surround modeSelect and play any source other than DVD Multi Using the DSP Modes 3D Headphone ModeReproducing the Sound Field Introducing the DSP ModesTo cancel the DSP modes ALL Channel Stereo modeMulti-channel digital signals Activating the DSP ModesUsing the DVD Multi Playback Mode Activating the DVD Multi Playback ModeMulti indicator also lights up Press DVD Multi so that DVD Multi appears on the displayCompu Link Remote Control System Same timePress the play 3 button on the CD player RX-8030VBKRX-7030VBK RX-7032VSLConnections 1 AV Compu Link Connection AV Compu Link Remote Control SystemConnections 2 Video Cable Connection Automatic Selection of TV’s Input Mode Automatic Power On/OffOne-Touch Video Play One-Touch DVD PlayOperating JVC’s Audio/Video Components Operating Audio ComponentsTuner Sound control section AmplifierCD changer 7/PCD recorder Cassette deckCH + Operating Video ComponentsDVD player Operating Other Manufacturers’ Video Equipment Enter manufacturer’s code using buttons 1 9, Release VCR 1 or VCRPress and hold Audio Press DVD Release AudioFor TV For VCR Manufacturer Codes For DBS tunerManufacturer Codes For DVD playerTroubleshooting Problem Possible Cause SolutionSpecifications RX-8030VBKOutput Power At Stereo operation RX-7030VBK/RX-7032VSLAudio Input Sensitivity/Impedance 1 kHz 200 mV/47 kΩ CoaxialDIGITAL 1 DVDLimited WARRANTYAUDIO-2 Authorized Service Centers RX-7030VBK/RX-7032VSL AUDIO/VIDEO Control Receiver RX-8030VBK RX-7030VBK Mises en garde, précautions et indications diverses For Canada/pour le Canada RX-8030VBK/RX-7030VBK English Introduction RX-8030VBK RX-7030VBK For RX-7030VBKOnly for RX-8030VBK VCR TV SOUND/DBSDVD MULTI, DVD, VCR , TV SOUND/DBS, CD, TAPE/CDR, FM, AM RX-7030VBK Digital 4 CDR Differences between RX-8030VBK and RX-7030VBKGetting Started RX-7030VBK For Front Speakers 2 terminals After connecting the speakers, set the speaker Installation information properly. You can use QuickSetting see Setting the Speakers onRX-8030VBK Left front speaker Center speakerRX-8030VBK/RX-7030VBK CD player For RX-7030VBKRX-7030VBK RX-7030VBK CD recorder To audio input To audio outputVideo camera RX-8030VBK/RX-7030VBK RX-8030VBK/RX-7030VBKRX-7030VBK ‰ To S-video input To composite video input DVD player Connecting the Power Cord DVD FM/AM VCR1 VCR2 CDR TAPE/MD LS RS Selecting the Front Speakers Attenuating the Input Signal For RX-7030VBK Brightness Receiving Radio Broadcasts Selecting the FM Reception Mode Basic Settings Basic Setting Items Basic Procedure 11 ft Dual Mono format is not identical with bilingual Setting the Component Video Input Adjusting Sound Adjusting the Equalization Patterns Select a speaker you want to adjust Surround back speakers LSB/RSB DTS*2 OFF Activating the Surround Modes Using the DSP Modes Activating the DSP Modes RX-8030VBK/RX-7030VBK CD player Cassette deck CD recorder To the TV’s Video Input 1 jack using S-video cables RX-8030VBK Equipment Video cord RX-7030VBKRX-8030VBK Equipment Source RX-8030VBK EquipmentOne-Touch Video Play Surrl Surrr Surr Back SBK MD recorder Start playing Stop playingDVD TV/DBS To change the transmittable signals for Press and hold CATV/DBSOperating a Catv converter or DBS tuner Operating another manufacturer’s TVEnter manufacturer’s code using buttons 1 9, Codes Manufacturer For TV For VCRZenith Nokia Philips 15, 17, 28 Nordmende Orion Short circuit of speaker terminals Specifications RX-7030VBK EN, FR Victor Company of JAPAN, Limited 0203NHMMDWJEIN