JVC RX-8030VBK Selecting the FM Reception Mode, While listening to an FM station, press FM Mode

To tune in a preset station

On the front panel:

1. Press FM or AM to select the band.

The last received station of the selected band is tuned in.

Selecting the FM Reception Mode

When an FM stereo broadcast is hard to receive or noisy, you can change the FM reception mode while receiving an FM broadcast.

•You can store the FM reception mode for each preset station (see page 23).

2.Press FM/AM PRESET 5 or ∞ until you find the channel you want.

•Pressing FM/AM PRESET 5 increases the number.

•Pressing FM/AM PRESET ∞ decreases the number.

From the remote control:

1 2 3

4 5 6

7/P 8 9

10/0 0 +10

While listening to an FM station, press FM MODE.

•Each time you press the button, the FM reception mode alternates between “AUTOMUTING” and “MODE MONO.”

	ANALOG	TUNED STEREO AUTO MUTING
L	R	LINEAR PCM

SPEAKERS 1

VOLUME

	ANALOG	TUNED
L	R	LINEAR PCM

SPEAKERS 1

VOLUME

1. Press FM/AM to select the band.

The last received station of the selected band is tuned in.

•Each time you press the button, the band alternates between FM and AM.

2.Press the 10 keys to select a preset channel number.

•For channel number 5, press 5.

•For channel number 15, press +10 then 5.

•For channel number 20, press +10 then 10.

•For channel number 30, press +10, +10, then 10.

Note:

When you use the 10 keys on the remote control, be sure that they are activated for the tuner, not for the CD and others. (See page 44.)

AUTOMUTING: Normally select this.

When a program is broadcasted in stereo, you will hear stereo sound;

when in monaural, you will hear monaural sounds.

This mode is also useful to suppress static noise between stations. The AUTO MUTING indicator lights up on the display. (Initial setting)

MODE MONO: Select this to improve the reception (but stereo effect will be lost).

In this mode, you will hear noise while tuning into the stations. The AUTO MUTING indicator goes off from the display. (The STEREO indicator also goes off.)

Note:

When you use the FM MODE on the remote control, be sure that it is activated for the tuner, not for the CD and others. (See page 44.)

24