7.With the help of a second person, hold a Screw Spacer (90) inside the lower end of the Left Upright (85). Insert an M10 x 95mm Screw (8) with an M10 Star Washer (9) into the Left Upright and the Screw Spacer. Repeat this step with a second Screw Spacer (90), an M10 x 68mm Screw (114), and an M10 Star Washer (9). Hold the Left Upright Spacer (86) and the Left Upright (85) against the Base (95). Tighten the M10 x 95mm Screw (8) and the M10 x 68mm Screw (114) until the heads of the Screws touch the Left Upright; do not fully tighten the Screws yet.
With the help of a second person, tip the treadmill so that the Base (95) is flat on the floor.
8.Identify the Left and Right Upright Covers (109, 110), which are marked “Left” and “Right.” Slide the Left Upright Cover onto the Left Upright (85) as shown. Slide the Right Upright Cover onto the Right Upright (89) as shown.
7 | 114 | 8 | 85 |
| |||
| 9 |
|
|
90 | 86 |
|
|
| 95 |
|
|
8 |
| 109 |
|
|
|
| |
|
| 85 |
|
|
|
| 89 |
|
|
| 110 |
10