1. Make sure that the power cord is unplugged. | 1 |
|
|
|
Remove the M10 Nut (19), the M10 x 50mm Bolt |
|
|
|
|
(31), and the shipping bracket (A) from the Base |
|
|
|
|
(95). Remove the shipping bracket from the |
|
|
|
|
other side of the treadmill. Discard the shipping |
|
|
|
|
brackets. Save the Nuts and the Bolts for |
|
|
|
|
steps 3 and 6. |
|
|
|
|
| A |
|
|
|
|
|
| 95 |
|
| 19 |
| 31 |
|
2. With the help of a second person, carefully tip | 2 | 88 | Hole |
|
the treadmill onto its left side. Partially fold the |
| |||
Frame (56) so that the treadmill is more stable; | 95 |
| 92 |
|
do not fully fold the Frame yet. |
| 3 | ||
Cut the shipping tie securing the Upright Wire | 56 |
|
| |
(88) to the Base (95). Next, locate a plastic tie in |
|
|
| |
the indicated hole in the Base, and use the tie to |
|
|
|
|
pull the Upright Wire out of the hole. |
|
|
|
|
Attach two Base Feet (92) to the Base (95) in | 94 |
|
|
|
the locations shown with two M4.2 x 25mm Tek | 92 3 |
|
| |
Screws (3) and two Base Foot Spacers (94). |
|
|
| |
Attach the other two Base Feet (92) with only |
|
|
|
|
two M4.2 x 25mm Tek Screws (3). |
|
| 92 3 | |
|
|
| ||
| 94 | 923 |
|
|
| 7 |
|
|
|