ProForm PATL59910.0 user manual Assembly

ASSEMBLY

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, some lubricant may be transferred to the top of the walking belt or the shipping carton. This is normal and does not affect treadmill performance. If there is lubri- cant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

Assembly requires the included hex keys and your own Phillips screwdriver, adjustable

wrench , and scissors .

Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number after the parentheses is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it is preat- tached. To avoid damaging parts, do not use power tools for assembly. Extra hardware may be included.

1/4" Star		M8 Star	M10 Star		3/8" Locknut	Base Foot Spacer
Washer (73)–2	Washer (10)–10		Washer (9)–4		(6)–3
						(94)–2
M4.2 x 13mm		M4.2 x 16mm		M4.2 x 25mm		M5 x 16mm Screw
Screw (116)–8		Screw (82)–4		Tek Screw (3)–4		(108)–2
Screw Spacer (90)–4			5/16" x 5/8"			M8 x 25mm
			Screw (113)–4			Bolt (5)–6
3/8" x 2"					M10 x 68mm Screw (114)–2
Bolt (37)–2
3/8" x 1 3/4"					M10 x 95mm Screw (8)–2
Bolt (7)–1
			6