5.Hold a Screw Spacer (90) inside the lower end of the Right Upright (89). Insert an M10 x 95mm Screw (8) with an M10 Star Washer (9) into the Right Upright and the Screw Spacer. Repeat this step with a second Screw Spacer (90), an M10 x 68mm Screw (114), and an M10 Star Washer (9).
Hold the Right Upright (89) against the Right Upright Spacer (91). Be careful not to pinch the Upright Wire (88). Tighten the M10 x 95mm Screw (8) and the M10 x 68mm Screw (114) until the heads of the Screws touch the Right Upright; do not fully tighten the Screws yet.
6.With the help of a second person, carefully tip the treadmill onto its right side. Partially fold the Frame (56) so that the treadmill is more stable; do not fully fold the Frame yet.
Attach a Wheel (97) with the M10 Nut (19), and the M10 x 50mm Bolt (31) that you removed in step 1. Do not overtighten the Nut; the Wheel must turn freely.
Press a Base Cap (87) into the Base (95).
5 | 89 | 8 | 114 |
| |||
|
|
| 9 88 |
91 90
6 |
|
|
87 | 31 |
|
| 56 | |
95 97 |
| |
19 |
| |
|
|
9