ProForm PFTL49707.0 user manual Latch Holes Wire Tie Large

Page 7

2.Orient the Left Upright (31) as shown, and attach it to the Base (48) with two 3/8" x 2 1/4" Bolts (40) and two 3/8" Star Washers (39); do not tighten the Bolts yet.

3.Attach a Wheel (45) to each side of the Base (48) with a 3/8" x 2 1/4" Bolt (40), two Wheel Spacers (44), and a 3/8" Nut (47) as shown. Do not overtighten the Bolts; the Wheels should turn freely.

4.Raise the Uprights (31, 36) so that the Base (48) is flat on the floor and positioned as shown.

See the far right drawing. Wrap the wire tie in the Right Upright (36) around the end of the Upright Wire (28). Then, pull the other end of the wire tie until the Wire Harness is extending from the upper end of the Right Upright.

Make sure that the end of the Upright Wire (28) does not fall into the Right Upright (36).

2

 

 

 

 

 

 

Latch

 

 

 

 

Holes

 

 

 

 

48

 

 

 

 

31

 

 

 

 

 

 

39

 

 

 

39

40

 

 

 

 

3

 

45

44

 

 

44

 

40

 

 

 

 

 

 

47

 

 

 

45

44

 

 

 

44

47

 

 

 

 

 

 

 

40

48

 

 

 

 

 

 

4

28

 

 

 

 

 

 

 

Wire Tie

31

36

28

Large

Hole

Wire

Tie

48

7

Image 7
Contents Model No. PFTL49707.0 Serial No QUESTIONS?Call TOLL-FREE Table of Contents Important Precautions Page Before YOU Begin Assembly Latch Holes Wire Tie Large See the left inset drawing. Identify the outer See the left inset drawing. Identify the twoOuter side of the Frame Spacer facing Bolt yetTwo 1/4 X 1/2 Bolts Star Washers 19. Be careful not to pinch Upright WireFront View Be careful not to pinch the wires. Next, thread Not tighten the Bolts yetSide View View from Above Page HOW to Plug in the Power Cord Operation and AdjustmentPRE-LUBRICATED Walking Belt Features of the Console Console DiagramHOW to USE the Manual Mode HOW to Turn on the PowerTurn on the fan if desired Avoid moving your hands. When your pulseMeasure your heart rate if desired Select a trainer workout HOW to USE a Trainer WorkoutSelect a custom program HOW to Create a Custom ProgramHOW to USE a Custom Program HOW to USE the Dumbbells Information ModeHOW to Lower the Treadmill for USE HOW to Fold and Move the TreadmillHOW to Fold the Treadmill for Storage HOW to Move the TreadmillProblem The power turns off during use TroubleshootingTop Problem The walking belt slows when walked on Exercise Frequency Exercise GuidelinesExercise Intensity Workout GuidelinesKey No. Qty Description Part LIST-Model No. PFTL49707.0Exploded Exploded Drawing B-Model No. PFTL49707.0 R0707A Exploded Drawing C-Model No. PFTL49707.0 Limited Warranty Ordering Replacement PartsIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT