Assembly, Your own phillips screwdriver | ProForm PFTL49390 manual

ASSEMBLY

Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the included allen wrench

and your own phillips screwdriver .

Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

Extension Leg Screw (53)Ð4

Latch Screw (35)Ð2

1.With the help of a second person, carefully raise the Uprights (11) until the treadmill is in the position shown.

2. Insert one of the Extension Legs (34) into the treadmill	2
as shown. Note: It may be helpful to tip the Uprights (11)	2
in the direction shown by the arrow, as you insert the	11
in the direction shown by the arrow, as you insert the
Extension Leg. Make sure that the bracket is on the in-
dicated side of the Extension Leg. Attach the Extension
Leg with an Extension Leg Screw (53). Be sure to
push on the head of the Extension Leg Screw while	53
tightening it.	53
Next, attach the other Extension Leg (34) in the same
way.
	Bracket
	34

ProForm PFTL49390 user manual Assembly, Your own phillips screwdriver

ASSEMBLY

and your own phillips screwdriver .