ProForm 831.291760 user manual Troubleshooting, Problem The power does not turn on, Solution

Page 23

TROUBLESHOOTING

Most treadmill problems can be solved by following the simple steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, call our toll-free HELPLINE at

1-800-736-6879, Monday through Saturday, 7 a.m. until 7 p.m. Central Time (excluding holidays).

PROBLEM: The power does not turn on

SOLUTION: a. Make sure that the power cord is plugged into a surge suppressor, and that the surge suppressor is plugged into a properly grounded outlet (see page 8). Use only a single-outlet surge suppressor that meets all of the specifications described on page 8. Important: The treadmill is not compatible with GFCI-equipped outlets.

b. After the power cord has been plugged in, make sure that the key is fully inserted into the console.

c. Check the circuit breaker located on the treadmill near the power cord. If the switch protrudes as shown, the circuit breaker has tripped. To reset the circuit breaker, wait for five minutes and then press the switch back in.

d. Check the on/off switch located on the treadmill near the power cord. The switch must be in the on posi- tion.

PROBLEM: The power turns off during use

c

 

Tripped

Reset

d

On

 

 

Position

SOLUTION: a. Check the circuit breaker located on the treadmill frame near the power cord (see c. above). If the circuit breaker has tripped, wait for five minutes and then press the switch back in.

b. Make sure that the power cord is plugged in. If the power cord is plugged in, unplug it, wait for five minutes, and then plug it back in.

c. Remove the key from the console. Reinsert the key fully into the console.

d. Make sure that the on/off switch is in the on position.

e. If the treadmill still will not run, please call our toll-free HELPLINE.

PROBLEM: The speed display on the console does not function properly

SOLUTION:

a. Remove the key and

UNPLUG THE POWER CORD

.

a

64

37

 

Carefully lower the Uprights (64) to the floor. Remove

 

 

 

 

 

the three indicated Small Screws (37).

 

 

 

 

 

Raise the Uprights (64) to the vertical position. Pivot

 

 

 

 

 

the Hood (1) off.

 

 

 

 

64

 

 

 

 

 

 

1

23

Image 23
Contents Patent Pending Serial Number DecalTable of Contents Treadmill is capable of high speeds Important PrecautionsUse the treadmill only as described Wear appropriate exercise clothing whenNever insert or drop any object into any opening Left Side Using the treadmillBefore YOU Begin Main in the Uprights AssemblyDriver Wire cutters Insert the other Extension Leg not shown in the same wayWith soapy water ThreeSible onto the post on the left Upright This product must be grounded.If it should malfunc HOW to Plug in the Power CordPerformant Lube Use only a single-outlet surge suppressor that isTo reduce the possibility of electric shock Console DiagramFeatures of the Console HOW to USE the Manual Mode HOW to Turn on the PowerStand See page 20 and turn off the demo modeTime/Incline/Segment DisplayStart the program HOW to USE Personal Trainer Programs2Select one of the personal trainer programs Press the Start button or the Speed2Insert the key fully into the console When the program has endedFollow your progress with the displays Put on the chest pulse sensorKey from the console Enter your ageDecrease Cassettes HOW to Connect Your Portable CD PlayerHOW to Connect Your Portable Stereo Audio 5mm Cable Adapter HOW to Connect Your Home StereoCable Wire removed from Line OUT jack HOW to Connect Your ComputerInsert the key into the console HOW to Connect Your VCRAudio Adapter Cable ProgramsDisplays Next settings of the CD or video programChange to the next settings of the CD or video Program If you are using your portable CD playerHOW to USE Programs Directly from OUR WEB Site Speed Button so the display is blank Information MODE/DEMO ModePlay should be blank If a d apHOW to Move the Treadmill HOW to Fold the Treadmill for StoragePin Catch HOW to Lower the Treadmill for USEHold the upper end of the treadmill with your right hand Hold the treadmill firmly with both hands, and lowerSolution TroubleshootingProblem The power does not turn on Problem The power turns off during useBelt has shifted to the left Magnet is aligned with the Reed SwitchSwitch is about 1/8 Problem The walking belt slows when walked on Top ViewExercise Frequency Conditioning GuidelinesExercise Intensity Workout GuidelinesSuggested Stretches Page SEARS, Roebuck and CO., Dept WA, Hoffman ESTATES, IL Full 90 DAY WarrantyRemove this Exploded Drawing and Part List from the Manual Key No. Qty. Description KeyDescription Qty 831291760