ProForm 831.291760 Magnet is aligned with the Reed Switch, Switch is about 1/8, Move the key

Page 24

Locate the Reed Switch (18) and the Magnet (48) on the left side of the Pulley (78). Turn the Pulley until the

Magnet is aligned with the Reed Switch.

Make sure

that the gap between the Magnet and the Reed

 

Switch is about 1/8”.

If necessary, loosen the 3/4”

Screw (24) and move the Reed Switch slightly. Retighten the Screw. Re-attach the hood, and run the treadmill for a few minutes to check for a correct speed reading.

PROBLEM: The walking belt slows when walked on

1/8”

78

24

 

18

48

Top

 

View

 

SOLUTION: a. Use only a single-outlet surge suppressor that meets all of the specifications described on page 8.

b. If the walking belt is overtightened, treadmill perfor- mance may decrease and the walking belt may be-

come damaged. Remove the key andUNPLUG THE

POWER CORD . Using the allen wrench, turn both rear roller adjustment bolts counterclockwise, 1/4 of a turn. When the walking belt is properly tightened, you should be able to lift each side of the walking belt 3 to 4 inches off the walking platform. Be careful to keep the walking belt centered. Plug in the power cord, in- sert the key and run the treadmill for a few minutes. Repeat until the walking belt is properly tightened.

b

3”–4”

Rear Roller Adjustment Bolts

c. If the walking belt still slows when walked on, please call our toll-free HELPLINE.

PROBLEM: The walking belt is off-center or slips when walked on

SOLUTION:

a. If the walking belt is off-center, first remove the key

 

 

and UNPLUG THE POWER CORD

. If the walking

 

 

belt has shifted to the left,

use the allen wrench to

 

 

turn the left rear roller bolt clockwise 1/2 of a turn;

if

 

the walking belt has shifted to the right,

turn the

 

 

bolt counterclockwise 1/2 of a turn. Be careful not to

 

 

overtighten the walking belt. Plug in the power cord,

 

 

insert the key and run the treadmill for a few minutes.

 

 

Repeat until the walking belt is centered.

 

a

b. If the walking belt slips when walked on, first remove

the key and UNPLUG THE POWER CORD. Using the allen wrench, turn both rear roller bolts clockwise, 1/4 of a turn. When the walking belt is correctly tight- ened, you should be able to lift each side of the walk-

ing belt 3 to 4 inches off the walking platform. Be careful to keep the walking belt centered. Plug in the power cord, insert the key and carefully walk on the

treadmill for a few minutes. Repeat until the walking belt is properly tightened.

b

PROBLEM: The incline of the treadmill does not change correctly or does not change when iFIT.com

CDs and videos are played

SOLUTION:

a. With the key in the console, press one of the Incline buttons.

While the incline is changing, re-

 

move the key.

After a few seconds, re-insert the key. The treadmill will automatically rise to the

 

maximum incline level and then return to the minimum level. This will recalibrate the incline system.

24

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Serial Number Decal Patent PendingTable of Contents Important Precautions Use the treadmill only as describedWear appropriate exercise clothing when Treadmill is capable of high speedsNever insert or drop any object into any opening Using the treadmill Before YOU BeginLeft Side Assembly Driver Wire cuttersInsert the other Extension Leg not shown in the same way Main in the UprightsThree Sible onto the post on the left UprightWith soapy water HOW to Plug in the Power Cord Performant LubeUse only a single-outlet surge suppressor that is This product must be grounded.If it should malfuncConsole Diagram Features of the ConsoleTo reduce the possibility of electric shock HOW to Turn on the Power HOW to USE the Manual ModeSee page 20 and turn off the demo mode Time/Incline/SegmentDisplay StandHOW to USE Personal Trainer Programs 2Select one of the personal trainer programsPress the Start button or the Speed Start the programWhen the program has ended Follow your progress with the displaysPut on the chest pulse sensor 2Insert the key fully into the consoleEnter your age DecreaseKey from the console HOW to Connect Your Portable CD Player HOW to Connect Your Portable StereoCassettes HOW to Connect Your Home Stereo Cable Wire removed from Line OUT jackHOW to Connect Your Computer Audio 5mm Cable AdapterHOW to Connect Your VCR Audio Adapter CablePrograms Insert the key into the consoleNext settings of the CD or video program Change to the next settings of the CD or video ProgramIf you are using your portable CD player DisplaysHOW to USE Programs Directly from OUR WEB Site Information MODE/DEMO Mode Play should be blankIf a d ap Speed Button so the display is blankHOW to Fold the Treadmill for Storage HOW to Move the TreadmillHOW to Lower the Treadmill for USE Hold the upper end of the treadmill with your right handHold the treadmill firmly with both hands, and lower Pin CatchTroubleshooting Problem The power does not turn onProblem The power turns off during use SolutionMagnet is aligned with the Reed Switch Switch is about 1/8Problem The walking belt slows when walked on Top View Belt has shifted to the leftConditioning Guidelines Exercise IntensityWorkout Guidelines Exercise FrequencySuggested Stretches Page Full 90 DAY Warranty SEARS, Roebuck and CO., Dept WA, Hoffman ESTATES, ILRemove this Exploded Drawing and Part List from the Manual Key Description QtyKey No. Qty. Description 831291760
Top Page Image Contents