ProForm 831.291710 Assembly requires two people, Extension Leg with an Extension Leg Screw

Page 5

ASSEMBLY

Assembly requires two people.

Set the treadmill in a cleared area and remove all packing materials. Do not

dispose of the packing materials until assembly is completed.

Assembly requires the included allen wrench

and your own phillips screwdriver

and wire cutters

.

Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

 

 

Small Screw (13)–2

 

 

 

 

Extension Leg Screw/Handrail Screw (53)–4

Console Screw (99)–6

 

 

 

 

1.With the help of a second person, carefully raise the Uprights (11) until the treadmill is in the position shown.

1

11

2. Insert one of the Extension Legs (34) into the treadmill

2

as shown. (Note: It may be helpful to tip the Uprights

11

[11] in the direction shown by the arrow as you insert

 

the Extension Leg.) Make sure that the Base Pad (40) is

 

on the indicated side of the Extension Leg. Attach the

 

Extension Leg with an Extension Leg Screw (53).

Make

sure to push on the head of the Extension Leg

 

Screw while tightening it.

53

 

Attach the other Extension Leg (34) in the same way.

 

 

34

 

40

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents SEARS, Roebuck and CO Hoffman ESTATES, IL Model No Serial NoSerial Number Decal Important Precautions Table of ContentsMove the Treadmill on Never leave the treadmill unattended whileNot in use Back Before YOU BeginFor your benefit, read this manual carefully before Extension Leg with an Extension Leg Screw AssemblyAssembly requires two people Other connector in the Console Base Into the corresponding connector in the Console BasePlastic tie tight and cut off the end Until they are snug do not overtighten the ScrewsPerformant Lube HOW to Plug in the Power CordThis product must be grounded.If it should malfunc Grounded Outlet BoxAdjust the speed in small increments Console DiagramBattery Installation 14 for more informationAdjust the incline of the treadmill as desired Reset position before the walking belt can be restartedTreadmill, make sure to lift with your legs rather HOW to USE the Upper Body ArmsHOW to Fold the Treadmill for Storage HOW to Lower the Treadmill for USE HOW to Move the TreadmillYour legs and keep your back straight Base Front WheelsProblem The power does not turn on TroubleshootingProblem The power turns off during use Remove the key from the consoleProblem ONE of the Upper Body Arms Squeaks During USE Power CordSolution Conditioning Guidelines HOW to Measure Your Heart RateExercise Intensity Workout GuidelinesSuggested Stretches Exercise FrequencySEARS, Roebuck and CO., Dept WA, Hoffman ESTATES, IL Full 90 DAY WarrantyRemove this Exploded Drawing and Part List from the Manual Qty Description Key No. Qty Part LIST-Model NoR0502A
Top Page Image Contents