ProForm 831.293201 user manual Performant Lube, HOW to Plug in the Power Cord, Grounded Outlet Box

Page 8

OPERATION AND ADJUSTMENT

THE PERFORMANT LUBE

TM WALKING BELT

Your treadmill features a walking belt coated with

PERFORMANT LUBETM , a high-performance lubricant.

IMPORTANT: Never apply silicone spray or other substances to the walking belt or the walking plat- form. Such substances will deteriorate the walking belt and cause excessive wear.

HOW TO PLUG IN THE POWER CORD

DANGER: Improper connection of the equipment-grounding conductor can

result in an increased risk of electric shock. Check with a qualified electrician or service- man if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided with the product—if it will not fit the outlet, have a proper outlet installed by a qualified electrician.

Your treadmill, like any other type of sophisticated electronic equipment, can be seriously damaged by sudden voltage changes in your home’s power. Voltage surges, spikes, and noise interference can result from weather conditions or from other appliances

being turned on or off. To decrease the possibility of your treadmill being damaged, always use a surge suppressor with your treadmill (see drawing 1 at

the right). To purchase a surge suppressor, see your local Sears or call 1-800-366-7278 and order part number 146148.

Use only a single-outlet surge suppressor that is UL 1449 listed as a transient voltage surge sup- pressor (TVSS). The surge suppressor must have a UL suppressed voltage rating of 400 volts or less and a minimum surge dissipation of 450 joules.

The surge suppressor must be electrically rated for 120 volts AC and 15 amps. There must be a monitoring light on the surge suppressor to indi- cate whether it is functioning properly. Failure to use a properly functioning surge suppressor could result in damage to the control system of the treadmill. If the control system is damaged, the walking belt may change speed or stop unexpect- edly, which may result in a fall and serious injury.

This product must be grounded.If it should malfunc-

tion or break down, grounding provides a path of least resistance for electric current to reduce the risk of elec- tric shock. This product is equipped with a cord having

an equipment-grounding conductor and a grounding plug. Plug the power cord into a surge suppressor, and plug the surge suppressor into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. Important: The treadmill is not compatible with GFCI-equipped outlets.

This product is for use on a nominal 120-volt circuit, and has a grounding plug that looks like the plug illus- trated in drawing 1 below. A temporary adapter that looks like the adapter illustrated in drawing 2 may be used to connect the surge suppressor to a 2-pole receptacle as shown in drawing 2 if a properly grounded outlet is not available.

1

Grounded Outlet Box

 

Surge Suppressor

 

Grounding Pin

Grounding Pin

 

Grounded Outlet

Grounding Plug

 

2

Grounded Outlet Box

Adapter

Surge Suppressor

Lug

Metal Screw

The temporary adapter should be used only until a properly grounded outlet (drawing 1) can be installed by a qualified electrician.

The green-colored rigid ear, lug, or the like extending from the adapter must be connected to a permanent ground such as a properly grounded outlet box cover. Whenever the adapter is used it must be held in place

by a metal screw. Some 2-pole receptacle outlet box covers are not grounded. Contact a qualified elec- trician to determine if the outlet box cover is grounded before using an adapter.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Model No Serial No Serial Number DecalTable of Contents Important PrecautionsNever leave the treadmill unattended while it Move the Treadmill onNever insert any object into any opening Decals shown have been placed on your treadmill. If aUsing the treadmill Before YOU BeginRight Side BackPart is missing, call toll-free AssemblyMake sure that the power cord is unplugged Place Uprights. Retighten all four Upright Bolts Console 107 as shownHOW to Plug in the Power Cord Performant LubeThis product must be grounded.If it should malfunc Grounded Outlet BoxPrograms Features of the ConsoleCDs, call toll-free HOW to USE the Manual Mode Calories/Pulse DisplayDistance/Incline dis Next, stand onHOW to USE Preset Programs Select one of the preset programsPress the Start button or the Speed Start the programPut it in a safe place From the console When the program has endedFollow your progress with the displays From the console Enter your age and a maximum speed settingTurn on the fans if desired Button or the Speed Button on the console Next settings of the CD programPress the Play/Pause button to start Program HOW to Play Music CD’S UAL Mode on page 10. Note Due to the natureHOW to Connect the Treadmill to Your VCR or Computer Cable Adapter Wire removed fromHOW to Connect the Treadmill to Your Computer Audio Adapter CableMph. When the next chirp is heard, Does not change when a chirp is heardPress the Play button on your VCR Treadmill is about to changeHOW to USE Programs Directly from OUR WEB Site Next settings of the programGo to your computer and start an internet Connection Lect a programInformation MODE/DEMO Mode HOW to Level the TreadmillButtons on the console will not operate So the display is blankHOW to Lower the Treadmill for USE HOW to Fold the Treadmill for StorageHOW to Move the Treadmill Power Cord TroubleshootingSolution Problem The walking belt slows when walked on Unplug Power CordIf the walking Belt has shifted to the leftConditioning Guidelines Exercise IntensityWorkout Guidelines Exercise FrequencySuggested Stretches Qty Description Key No. QtyWasher Part Identification Chart Key No. Qty DescriptionR0603A Exploded Part No R0603A Full ONE Year WarrantySears, Roebuck and Co., Dept WA, Hoffman Estates, IL
Top Page Image Contents