8. Slide the Right Upright Sleeve (96) up against | 8 |
|
|
|
the console assembly. Attach the Right Upright |
|
|
| |
Sleeve with a #8 x 3/4" Screw (4) and a #8 x |
|
|
| Console |
3/4" Tek Screw (21) as shown. | 73 |
|
| |
Attach the Left Upright Sleeve (not shown) to |
| 4 | Assembly | |
the console assembly as described above. |
|
|
| |
|
|
| 96 |
|
|
| 21 | 74 | |
9. With the help of a second person, raise the | 9 |
|
|
|
front of the treadmill and insert the crossbar on |
|
|
| |
the Base (83) into the cutout in the cardboard |
|
|
|
|
stand as shown. Have the second person |
|
|
|
|
hold the treadmill to prevent it from moving |
|
|
|
|
forward or backward. |
|
|
| 72 |
Firmly tighten the four 3/8" x 3 3/4" Bolts (72). |
|
|
| |
With the help of the second person, lower the |
|
|
|
|
treadmill off the cardboard stand. |
| 83 |
|
|
| 72 | Cardboard | ||
|
| |||
|
| Stand |
10.Note the location of the 75 ohm terminal and the audio/video input jack on the treadmill. For the television to operate, the included AV Wire (88) and your DVD player or VCR must be connected to the audio/video input jack or a CATV cable or antenna must be connected to the 75 ohm termi- nal (see page 13).
10 | Audio/ |
| |
| Video |
| Input |
| 75 Ohm |
| Terminal |
| 88 |
11.Make sure that all parts are properly tightened before you use the treadmill. Keep the included hex key in a secure place; the hex key is used to adjust the walking belt (see pages 29 and 30). To protect the floor or carpet from damage, place a mat under the treadmill.
11