ProForm PFTL14008.0 user manual Troubleshooting, Important The treadmill is not

Page 28

TROUBLESHOOTING

Most treadmill problems can be solved by following the steps below. Find the problem that applies, and follow the steps listed. If further assistance is needed, please see the front cover of this manual. PROBLEM: The power does not turn on

SOLUTION: a. Make sure that the power cord is plugged into a surge suppressor, and that the surge suppressor

is plugged into a properly grounded outlet (see page 14). Use only a single-outlet surge suppres-

sor that meets all of the specifications described on page 14.

IMPORTANT: The treadmill is not

compatible with GFCI-equipped outlets.

 

 

b. After the power cord has been plugged in, make sure that the key is inserted into the console.

c. Check the reset/off circuit breaker located on the

c

 

treadmill frame near the power cord. If the switch pro-

 

trudes as shown, the circuit breaker has tripped. To

Tripped

Reset

reset the circuit breaker, wait for five minutes and

then press the switch to the reset position.

Position

Position

PROBLEM: The power turns off during use

 

 

SOLUTION: a. Check the reset/off circuit breaker (see the drawing above). If the circuit breaker has tripped, wait for five minutes and then press the switch to the reset position.

b. Make sure that the power cord is plugged in. If the power cord is plugged in, unplug it, wait for five minutes, and then plug it back in.

c. Remove the key from the console. Reinsert the key into the console. d. If the treadmill still will not run, please see the front cover of this manual.

PROBLEM: The console displays remain lit when you remove the key from the console

SOLUTION: a. The console features a display demo mode, designed to be used if the treadmill is displayed in a

store. If the displays remain lit when you remove the key, the demo mode is turned on. To turn off

the demo mode, hold down the Stop button for a few seconds. If the displays are still lit, see THE

INFORMATION MODE on page 25 to turn off the demo mode.

PROBLEM: The displays of the console do not function properly

 

SOLUTION: a. Remove the key from the console and UNPLUG THE

a

POWER CORD. Place the treadmill in the storage po-

sition (see HOW TO FOLD AND MOVE THE TREAD-

4

MILL on page 26).

Next, remove the two indicated #8 x 3/4" Screws (4).

 

 

4

28

Page 27 Page 29
Image 28
Page 27 Page 29
Contents QUESTIONS? Model No. PFTL14008.0 Serial NoMon.-Fri a.m.-6 p.m. MT Sat a.m.-4 p.m. MT On the WEBTable of Contents Important Precautions Page Power Lines Ground Standoff Service Clamp Before YOU Begin Assembly Bolts yet Ful not to pinch the Upright Wire HarnessBe careful not to pinch the Cables Left Right Console Assembly Wire75 Tie Console Assembly Wire Tie Console assembly as described above Attach the Left Upright Sleeve not shown toSmall Screws HOW to Connect a VCR or DVD Player HOW to Connect AN External Source Using a Catv CableUsing the AV Wire HOW to Plug in the Power Cord Operation and AdjustmentPRE-LUBRICATED Walking Belt Console Diagram Features of the Console HOW to Turn on the Power HOW to USE the Manual ModeStart the walking belt and adjust the speed Insert the key into the consoleFollow your progress with the displays. The matrix-When you Turn on the fan if desiredSelect a preset workout HOW to USE a Preset WorkoutStart the walking belt HOW to Create a Custom Workout Select a custom workoutHOW to USE a Custom Workout Adjust the volume Scan for television channelsSelect a television source Select the desired channelHOW to USE the Remote Control HOW to Replace the Batteries in the Remote ControlHOW to Adjust the Television Settings Scan and save channels Exit the MenuHOW to USE the Sound System Information ModeOptional Chest Pulse Sensor HOW to Fold and Move the Treadmill HOW to Move the TreadmillHOW to Lower the Treadmill for USE Troubleshooting Problem The power turns off during useImportant The treadmill is not Compatible with GFCI-equipped outletsProblem The walking belt slows when walked on Unplug the Power CORD. If the walking beltTop Ing belt has shifted to the right, turn the left idlerKey and Unplug the Power CORD. Using Problem Television reception is poorProblem The remote control does not function correctly Problem The television is not receiving a signalProblem The volume cannot be turned up Problem The television needs to be cleanedExercise Guidelines Exercise IntensityWorkout Guidelines Exercise FrequencyPart LIST-Model No. PFTL14008.0 Qty DescriptionDescription Key No. Qty 3355 Exploded Drawing B-Model No. PFTL14008.0 R0109A Exploded Drawing C-Model No. PFTL14008.0 R0109A Exploded Drawing D-Model No. PFTL14008.0 R0109A Exploded Drawing E-Model No. PFTL14008.0 R0109A Limited Warranty Ordering Replacement PartsIcon Health & Fitness, Inc., 1500 S W., LOGAN, UT

PFTL14008.0 specifications

The ProForm PFTL14008.0 is a state-of-the-art treadmill designed for fitness enthusiasts seeking a balance of performance, technology, and convenience. This model boasts an array of features that cater to varied workout needs, making it an exceptional choice for both beginners and seasoned athletes.

One of the standout characteristics of the PFTL14008.0 is its powerful motor. The treadmill is equipped with a robust 2.0 CHP motor, which provides ample power for a variety of workouts, including running, jogging, and walking. This motor ensures consistent performance across all speeds, allowing users to reach their fitness goals while enjoying a smooth experience.

The running surface of the ProForm PFTL14008.0 is another significant feature. It offers a spacious 16 x 50-inch deck, providing plenty of room for users to stride comfortably. Additionally, the deck is cushioned with ProShox technology, which helps reduce impact on joints, making it ideal for both high-impact workouts and longer training sessions.

In terms of technological integration, the treadmill is equipped with a 5-inch LCD display that provides essential information such as speed, time, distance, and calories burned. This information is crucial for monitoring progress and motivation. The ProForm PFTL14008.0 also features quick-speed buttons that allow users to adjust their workout intensity with ease.

Connectivity options further enhance the user experience. The treadmill is iFit compatible, offering access to personalized training programs, global workouts, and real-time coaching. This technology keeps workouts engaging and tailored to individual fitness levels. Moreover, users can easily connect their devices through Bluetooth, allowing them to listen to music or follow along with fitness videos.

Safety features have been prioritized in the design of the ProForm PFTL14008.0. The treadmill includes a safety key that stops the machine if the user falls, ensuring a safer workout experience. With built-in transport wheels, moving the treadmill is effortless, making it a versatile addition to any home gym.

Durability is another hallmark of the ProForm PFTL14008.0, which is built to withstand rigorous use over time. The frame is sturdy and designed to accommodate various user weights and heights, making it an excellent investment for family use.

In summary, the ProForm PFTL14008.0 treadmill combines power, technological advancements, and thoughtful design, catering to a range of workout preferences while providing a safe, effective, and enjoyable fitness experience. Whether for casual exercise or serious training, this treadmill is engineered to support users on their fitness journey.
Top Page Image Contents