ProForm PFTL14008.0 Key and Unplug the Power CORD. Using, Problem Television reception is poor

Page 30

b. If the walking belt slips when walked on, first remove

 

b

the key and UNPLUG THE POWER CORD. Using

the hex key, turn both idler roller bolts clockwise, 1/4

 

of a turn. When the walking belt is correctly tightened,

 

you should be able to lift each edge of the walking

 

belt 3 to 4 in. (8 to 10 cm) off the walking platform. Be

 

careful to keep the walking belt centered. Then, plug

 

in the power cord, insert the key, and carefully walk

 

on the treadmill for a few minutes. Repeat until the

 

walking belt is properly tightened.

 

PROBLEM: The incline of the treadmill does not change correctly

SOLUTION: a. With the key in the console, press one of the Incline buttons. While the incline is changing, re- move the key. After a few seconds, re-insert the key. The treadmill will automatically rise to the maximum incline level and then return to the minimum level. This will recalibrate the incline system.

PROBLEM: Television reception is poor

SOLUTION: a. Make sure that the television settings are set correctly. See HOW TO ADJUST THE TELEVISION SETTINGS on page 23.

b. For the digital television to operate properly, good reception is necessary. If you are using an an- tenna, make sure that it is properly connected and adjusted for optimal reception. (See HOW TO CONNECT AN ANTENNA on page 13.)

c.Check for the problems listed below and follow the applicable instructions.

•Ignition (black spots or horizontal streaks that appear or a picture that flutters or drifts)— Usually this is caused by interference from automobile ignition systems, neon lamps, electric drifts, or other electric appliances. Try changing the position of the treadmill or other electric appliances to correct the problem.

•Ghosts—Ghosts are caused by the television signal following two paths—one is the direct path and the other is reflected from tall buildings, hills, or other objects. Change the direction or po- sition of the antenna to improve reception.

•Blue Screen—If the treadmill is located in the fringe area of a television station where the sig- nal is weak, the picture may be of poor quality or a blue screen may appear. If the signal is weak, it may be necessary to install an external antenna to improve the picture.

•Fading—If blocks of the picture are missing, the picture moves around the screen, or the pic- ture disappears, the signal may be weak. Change the direction or position of the antenna to im- prove reception. Make sure the television settings are set correctly (see HOW TO ADJUST TELEVISION SETTINGS on page 23). Do not use a splitter.

Note: If one of these problems appears when the cable from a CATV company is connected, the problem may be caused by the cable company broadcast.

30

Page 29 Page 31
Image 30
Page 29 Page 31
Contents Mon.-Fri a.m.-6 p.m. MT Sat a.m.-4 p.m. MT QUESTIONS?Model No. PFTL14008.0 Serial No On the WEBTable of Contents Important Precautions Page Power Lines Ground Standoff Service Clamp Before YOU Begin Assembly Ful not to pinch the Upright Wire Harness Bolts yetBe careful not to pinch the Cables Left Right Console Assembly Wire75 Tie Console Assembly Wire Tie Console assembly as described above Attach the Left Upright Sleeve not shown toSmall Screws HOW to Connect AN External Source Using a Catv Cable HOW to Connect a VCR or DVD PlayerUsing the AV Wire Operation and Adjustment HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt Console Diagram Features of the Console Start the walking belt and adjust the speed HOW to Turn on the PowerHOW to USE the Manual Mode Insert the key into the consoleFollow your progress with the displays. The matrix-When you Turn on the fan if desiredHOW to USE a Preset Workout Select a preset workoutStart the walking belt HOW to Create a Custom Workout Select a custom workoutHOW to USE a Custom Workout Select a television source Adjust the volumeScan for television channels Select the desired channelHOW to USE the Remote Control HOW to Replace the Batteries in the Remote ControlHOW to Adjust the Television Settings Scan and save channels Exit the MenuInformation Mode HOW to USE the Sound SystemOptional Chest Pulse Sensor HOW to Fold and Move the Treadmill HOW to Move the TreadmillHOW to Lower the Treadmill for USE Important The treadmill is not TroubleshootingProblem The power turns off during use Compatible with GFCI-equipped outletsTop Problem The walking belt slows when walked onUnplug the Power CORD. If the walking belt Ing belt has shifted to the right, turn the left idlerKey and Unplug the Power CORD. Using Problem Television reception is poorProblem The volume cannot be turned up Problem The remote control does not function correctlyProblem The television is not receiving a signal Problem The television needs to be cleanedWorkout Guidelines Exercise GuidelinesExercise Intensity Exercise FrequencyPart LIST-Model No. PFTL14008.0 Qty DescriptionDescription Key No. Qty 3355 Exploded Drawing B-Model No. PFTL14008.0 R0109A Exploded Drawing C-Model No. PFTL14008.0 R0109A Exploded Drawing D-Model No. PFTL14008.0 R0109A Exploded Drawing E-Model No. PFTL14008.0 R0109A Ordering Replacement Parts Limited WarrantyIcon Health & Fitness, Inc., 1500 S W., LOGAN, UT

PFTL14008.0 specifications

The ProForm PFTL14008.0 is a state-of-the-art treadmill designed for fitness enthusiasts seeking a balance of performance, technology, and convenience. This model boasts an array of features that cater to varied workout needs, making it an exceptional choice for both beginners and seasoned athletes.

One of the standout characteristics of the PFTL14008.0 is its powerful motor. The treadmill is equipped with a robust 2.0 CHP motor, which provides ample power for a variety of workouts, including running, jogging, and walking. This motor ensures consistent performance across all speeds, allowing users to reach their fitness goals while enjoying a smooth experience.

The running surface of the ProForm PFTL14008.0 is another significant feature. It offers a spacious 16 x 50-inch deck, providing plenty of room for users to stride comfortably. Additionally, the deck is cushioned with ProShox technology, which helps reduce impact on joints, making it ideal for both high-impact workouts and longer training sessions.

In terms of technological integration, the treadmill is equipped with a 5-inch LCD display that provides essential information such as speed, time, distance, and calories burned. This information is crucial for monitoring progress and motivation. The ProForm PFTL14008.0 also features quick-speed buttons that allow users to adjust their workout intensity with ease.

Connectivity options further enhance the user experience. The treadmill is iFit compatible, offering access to personalized training programs, global workouts, and real-time coaching. This technology keeps workouts engaging and tailored to individual fitness levels. Moreover, users can easily connect their devices through Bluetooth, allowing them to listen to music or follow along with fitness videos.

Safety features have been prioritized in the design of the ProForm PFTL14008.0. The treadmill includes a safety key that stops the machine if the user falls, ensuring a safer workout experience. With built-in transport wheels, moving the treadmill is effortless, making it a versatile addition to any home gym.

Durability is another hallmark of the ProForm PFTL14008.0, which is built to withstand rigorous use over time. The frame is sturdy and designed to accommodate various user weights and heights, making it an excellent investment for family use.

In summary, the ProForm PFTL14008.0 treadmill combines power, technological advancements, and thoughtful design, catering to a range of workout preferences while providing a safe, effective, and enjoyable fitness experience. Whether for casual exercise or serious training, this treadmill is engineered to support users on their fitness journey.
Top Page Image Contents