ProForm PFTL39908.0 manual See the left inset drawing. Identify the two, Not tighten the Bolt yet

5. See the left inset drawing. Identify the two	5
Frame Spacers (11). Open the included packet
of grease, and apply grease to both sides of both
Frame Spacers. Then, identify the outer side of
each Frame Spacer.						54
Hold a Frame Spacer (11) between the Right
Upright (54) and the Lift Frame (23), with the
outer side of the Frame Spacer facing the
Right Upright.						9
With the help of a second person, raise the front							1
						14
of the treadmill. Attach the Lift Frame (23) to the					11
Right Upright (54) with an M10 x 60mm Bolt (1),
an M10 Flat Washer (14), and an M10 Star				23
Washer (9); do not tighten the Bolt yet.						Top View
	11		Inner
			Side			14	1
			Outer		11
						9
			Side		23
						54
6. See the left inset drawing. Identify the outer	6
side of the remaining Frame Spacer (11).			53
Hold the Frame Spacer (11) between the Left
Upright (53) and the Lift Frame (23), with the
outer side of the Frame Spacer facing the
Left Upright. Attach the Left Upright to the Lift
Frame with an M10 x 60mm Bolt (1), an M10 Flat		9
Washer (14), and an M10 Star Washer (9); do
not tighten the Bolt yet.		14	11
	1			23
	11		Inner			Top View
			Side		1	14	11
			Outer
						9	23
			Side
	8					53