Change the incline of the treadmill as desired

Mode Indicator

To stop the walking belt, press the Stop button. The elapsed time will begin to flash in the Time/Distance display.

Note: During the first few minutes that the treadmill is used, inspect the alignment of the walking belt, and align it if necessary (see page 16).

3 Change the incline of the treadmill as desired.

To change the incline of the treadmill, press either of the Incline buttons until the desired incline level is reached.

4 Follow your progress with the three displays.

Time/Distance

display—This display shows the elapsed time and the distance that you have walked or run. The display will change

from one number to the

other every few seconds, as shown by the mode indicators. When the Stop button is pressed, the elapsed time will flash.

Fat Calories/Calories/

Pulse display—This display shows the ap- proximate numbers of fat calories and calories you have burned (see FAT

BURNING on page 17). The display will change from one number to the other every few seconds, as shown by the mode indicators. The display will also show your heart rate when you use the pulse sensor (see step 5).

Speed display—This display shows the speed of the walking belt

Note: The console can display speed and dis- tance in either miles or kilometers. To change the unit of measurement,

hold down the Stop button, insert the key into the console, and continue to hold the Stop button for a moment. An “E” for English miles or an “M” for metric kilometers will appear in the Fat Calories/ Calories/Pulse display. Press the Speed increase button to change the unit of measurement. When the desired unit of measurement is selected, re- move the key and then reinsert it.

To reset the displays, press the Stop button, re- move the key, and then reinsert the key.

5 Measure your heart rate if desired.

To measure your heart rate, stand on

the foot rails and place your thumb on the pulse sen-

sor. Do not press too hard, or the circulation in your

thumb will be restricted and your pulse will not be detected. After a few seconds, the heart- shaped indicator in the Fat Calories/Calories/ Pulse display will begin to flash, one or two dashes (– –) will appear, and then your heart rate will be shown. Hold your thumb on the pulse sensor for about 15 seconds for the most accurate reading.

If the displayed heart rate appears to be too high or too low, or if your heart rate is not displayed, lift your thumb off the pulse sensor for a few seconds. Then, place your thumb on the pulse sensor as de- scribed above. Remember to stand still while mea- suring your heart rate.

6 Whenkey. you are finished exercising, remove the

Step onto the foot rails, press the Stop button, and remove the key from the console. Keep the key in a secure place.

PFTL312040 specifications

The ProForm PFTL312040 is a treadmill that epitomizes versatility and innovation in home fitness equipment. Designed for users looking to enhance their cardiovascular performance, this treadmill offers an array of features that cater to various workout preferences and fitness levels.

One of the standout characteristics of the ProForm PFTL312040 is its powerful 2.5 CHP motor, capable of supporting speeds up to 10 mph. This robust motor ensures a smooth and consistent workout experience, whether you're walking, jogging, or running. The treadmill also boasts a 0-10% incline feature, allowing users to simulate hill workouts and challenge themselves further. This function is particularly valuable for enhancing lower body strength and aerobic capacity.

Equipped with a spacious running surface measuring 20 inches by 55 inches, the ProForm PFTL312040 comfortably accommodates users of different heights and stride lengths. The tread belt is designed with ProForm’s patented FlexSelect cushioning system, which provides support and impact absorption, minimizing stress on joints during workouts. This technology enables users to toggle between a firmer surface for more intense performance or a softer experience for comfort.

The ProForm PFTL312040 comes with a built-in digital display that tracks essential workout metrics, including time, speed, distance, calories burned, and heart rate. Heart rate monitoring is further enhanced by dual grip sensors located on the handlebars, ensuring users can maintain their target heart rate throughout their workouts.

Additionally, the treadmill is iFit compatible, giving users access to a vast library of interactive workouts led by personal trainers. With Wi-Fi connectivity, you can easily sync the treadmill with your iFit account, allowing for personalized training plans and the ability to explore global terrains through Google Maps, making workouts more engaging and varied.

Other practical features include built-in speakers, a media shelf for devices, and easy folding capability for space-saving storage. The ProForm PFTL312040 combines functionality with convenience, making it an excellent choice for anyone looking to elevate their fitness journey in the comfort of their home. Whether you’re a beginner or an experienced athlete, this treadmill has the technology and features to support your goals effectively.