ProForm PATL50707.0 user manual Operation and Adjustment, PRE-LUBRICATED Walking Belt

Page 12

OPERATION AND ADJUSTMENT

THE PRE-LUBRICATED WALKING BELT

Your treadmill features a walking belt coated with high-performance lubricant. IMPORTANT: Never apply sili- cone spray or other substances to the walking belt or the walking platform. Such substances will deterio- rate the walking belt and cause excessive wear.

HOW TO PLUG IN THE POWER CORD

This product must be earthed. If it should malfunction or break

down, earthing provides a path of least resistance for electric cur- 1 rent to reduce the risk of electric shock. This product is equipped

with a power cord having an equipment-earthing conductor and an earthing plug. Important: If the power cord is damaged, it must be replaced with a manufacturer-recommended power cord.

See drawing 1. Plug the indicated end of the power cord into the socket on the treadmill.

See drawing 2. Plug the power cord into an appropriate outlet that is

 

 

 

2

properly installed and earthed in accordance with all local codes and

 

 

 

ordinances. Important: The treadmill is not compatible with

 

 

GFCI-equipped outlets.

 

 

 

 

 

Socket on Treadmill

Power

Cord

Outlet

DANGER: Improper connection of the equipment-earthing conductor can result in an in- creased risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly earthed. Do not modify the plug provided with the product—if it will not fit the outlet, have a proper outlet installed by a qualified electrician.

12

Image 12
Contents QUESTIONS? Model No. PATL50707.0 Serial NoTable of Contents Important Precautions Page Before YOU Begin Assembly Make sure that the power cord is unpluggedPage See the left inset drawing. Identify the two Outer side of the Frame Spacer facingDo not tighten the Bolt yet See the left inset drawing. Identify the outerConsole Wire Tie Bracket Large Hole Con sole Gas Spring. Be careful to avoid losing Knob Spring Collar Large Hole Pin Operation and Adjustment HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt Console Diagram Features of the ConsoleHOW to Turn on the Power HOW to USE the Manual Mode Select the manual modeInsert the key into the console Change the incline of the treadmill as desiredWhen you are finished exercising, remove Adjust the incline of the treadmill to the lowestWhen you fold the treadmill to the storage posi Rate will be shown. For the most accurate heartHOW to USE a Speed Workout Select one of the six speed workoutsHOW to Fold and Move the Treadmill HOW to Fold the Treadmill for StorageHOW to Move the Treadmill HOW to Lower the Treadmill for USE Troubleshooting Problem The power turns off during useTop View Problem The walking belt slows when walked on Exercise Guidelines Exercise IntensityWorkout Guidelines Exercise FrequencyR0907A Qty DescriptionDescription Exploded Drawing A-Model No. PATL50707 Exploded Drawing B-Model No. PATL50707.0 Exploded Drawing C-Model No. PATL50707.0 Exploded Drawing D-Model No. PATL50707.0 Ordering Replacement Parts Limited WarrantyIcon Authorized Dealer