ProForm PATL50707.0 See the left inset drawing. Identify the two, Do not tighten the Bolt yet

5. See the left inset drawing. Identify the two	5
Frame Spacers (11). Open the included packet
of grease, and apply grease to both sides of
both Frame Spacers. Then, identify the outer
side of each Frame Spacer.				54
Hold a Frame Spacer (11) between the Right
Upright (54) and the Lift Frame (23), with the
outer side of the Frame Spacer facing the
Right Upright. Attach the Right Upright to the				9
Lift Frame with an M10 x 60mm Patch Bolt (1),
an M10 Washer (14), and an M10 Star Washer					1
(9); do not tighten the Bolt yet.				14
			11
		23
	11
		Inner		54
		Side
				14	1
			11
		Outer
		Side	23	9
6. See the left inset drawing. Identify the outer	6
side of the remaining Frame Spacer (11).
Hold the Frame Spacer (11) between the Left		53
Upright (53) and the Lift Frame (23), with the
outer side of the Frame Spacer facing the
Left Upright. Attach the Left Upright to the Lift
Frame with an M10 x 60mm Patch Bolt (1), an
M10 Washer (14), and an M10 Star Washer (9);		9
do not tighten the Bolt yet.
		14
	1	11
			23
	11
		Inner		53
		Side
			1	14
					11
		Outer
		Side		9	23
	8