HOW TO USE A SPEED WORKOUT
1.Insert the key into the console.
See HOW TO TURN ON THE POWER on page 13.
2.Select one of the six speed workouts.
To select a speed work-
out, press the Workout Select button repeat- edly; “P- 1,” “P- 2,” “P- 3,” “P- 4,” “P- 5,” or
“P- 6” will appear in the
upper display for a few seconds to show which workout is selected. The maximum speed setting of the selected workout will also flash in one of the displays for a few seconds.
Each workout consists of 30
3.Press the Start button or the Speed increase button to start the workout.
When you press either button, the treadmill will au- tomatically adjust to the speed setting that is pro- grammed for the first segment of the workout. Hold the handrails and begin walking.
When the first segment ends, a series of tones will sound. If a different speed setting is programmed for the second segment, the speed setting will flash
in one of the displays to alert you, and then the speed of the walking belt will change. The work- out will continue until all the segments are com- pleted. The walking belt will then slow to a stop.
If the speed setting is too high or too low during the workout, you can manually override the setting by pressing the Speed buttons. However, when the next segment begins, the treadmill will automat- ically adjust to the speed setting for the next segment.
To stop the workout, press the Stop button. The time will begin to flash in one of the displays. To restart the workout, press the Start button or the Speed increase button. The walking belt will begin to move at 2 km/h. When the next segment begins, the speed of the walking belt will change if a differ- ent speed setting is programmed for the next seg- ment.
4.Change the incline of the treadmill as desired. See step 4 on page 14.
5.Follow your progress with the displays. See step 5 on pages 14 and 15.
6.Measure your heart rate if desired. See step 6 on page 15.
7.When you are finished exercising, remove the key from the console.
See step 7 on page 15.
16