HOW TO USE
To use
to D below.
A. Plug one end of the in- |
| ||
cluded audio cable into |
| ||
the jack near the treadmill |
| ||
power cord. | Make sure |
| |
that the audio cable is | Audio | ||
fully plugged in and | |||
Cable | |||
that it is not wrapped | |||
| |||
around the power cord. |
|
A. Plug one end of the in- |
|
cluded audio cable into |
|
the jack near the tread- | |
mill power cord. | Make |
sure that the audio |
|
cable is fully plugged | Audio |
in and that it is not | Cable |
wrapped around the |
|
power cord. |
|
B. To connect the tread- |
|
mill to a VCR, | plug the |
other end of the audio cable into the included adapter and plug the adapter into an AUDIO OUT jack on the VCR.
VIDEO AUDIO
OUT
IN
Adapter
Audio
Cable
B. To connect the tread- mill to a home stereo,
plug the other end of the audio cable into the in- cluded adapter and plug the adapter into a LINE OUT or an AUDIO OUT jack on the stereo.
VIDEO AUDIO
OUT
IN
Adapter
Audio
Cable
C . To connect the tread-
mill to a TV, plug the other end of the audio cable into the included adapter and plug the adapter into an AUDIO
OUT jack on the TV.
OUT
VIDEOAUDIO
IN
Adapter
Audio
Cable
C.To connect the tread- mill to a portable stereo, plug the other end of the audio cable into a LINE OUT or an AUDIO OUT jack on the portable stereo.
D.To connect the tread-
mill to a computer, | plug |
the other end of the |
|
audio cable into a LINE |
|
OUT or an AUDIO OUT |
|
jack on the computer. |
|
PHONES
Audio Cable
Audio Cable
Note: If your VCR is connected to a home stereo, you may connect the audio cable to the home stereo as
described in step B at the left. Remember,you must be able to hear the audio through speakers or
headphones in order to use
When the audio cable is properly connected, make sure that the on/off switch near the treadmill power cord is in the on position. Next, make sure that the power cord is properly plugged in. Follow the steps
below to use an
use the CD with a variety of PROFORM treadmills. Some instructions may not apply to this treadmill.
Note: Depending on the model of your stereo or computer, the jacks may be labeled differ- ently. If the jacks are already used or if you need to connect the audio cable to a SPEAKER jack or a HEADPHONE jack, you must purchase a
at your local electronics store.
CAUTION: You must be able to hear the audio through speakers or headphones in order to use
| |
To use | you must connect the tread- |
mill to your VCR or TV. To do this, follow steps A to C below.
1 Insert the key fully into the console.
When the key is inserted, the four dis- plays and various indica- tors on the console will light.
11