ProForm 485CX user manual HOW to USE a Trainer Program, Select a trainer program

Page 15

HOW TO USE A TRAINER PROGRAM

1.Insert the key into the console.

See HOW TO TURN ON THE POWER on page 13.

2.Select a trainer program.

To select

one of the trainer pro- grams, press

the Trainer Programs button re- peatedly until one of

the program indicators (“P1” through “P10”) ap- pears in the display. When a trainer program is se- lected, the program time will appear in the display, the maximum incline setting of the program and the maximum speed setting of the program will flash in the display for a few seconds, and a profile of the speed settings of the program will scroll across the display.

3.Press the Start button or the Speed increase button to start the program.

A moment after you press the button, the treadmill will automatically adjust to the first speed and in- cline settings of the program. Hold the handrails and begin walking.

Each program is divided into 30, 50, or 60 one- minute segments. One speed setting and one in- cline setting are programmed for each segment. Note: The same speed setting and/or incline setting may be programmed for two or more consecutive segments.

The speed

 

setting for

 

the first seg-

 

ment will be

 

shown in the

Current Segment

flashing

 

Current

 

Segment column of the display. (The incline set-

tings are not shown in the upper part of the dis- play.) The speed settings for the next several seg- ments will be shown in the columns to the right.

When only three seconds remain in the first seg- ment of the program, both the Current Segment column and the column to the right will flash and a series of tones will sound. If the speed and/or in- cline of the treadmill is about to change, the speed setting and/or the incline setting will flash in the display to alert you.

When the first segment is completed, all speed set- tings will move one column to the left. The speed setting for the second segment will then be shown in the flashing Current Segment column and the treadmill will automatically adjust to the speed and incline settings for the second segment. Note: If all of the indicators in the Current Segment column are lit, the speed settings may move downward so that only the highest indicators appear in the display.

The program will continue in this way until the speed setting for the last segment is shown in the Current Segment column and the last segment ends. The walking belt will then slow to a stop.

If the speed or incline setting for the current seg- ment is too high or too low, you can manually over- ride the setting by pressing the Speed or Incline buttons. Every few times a Speed button is pressed, an additional indicator will appear or dis- appear in the Current Segment column; if any of the columns to the right of the Current Segment column have the same number of lit indicators as the Current Segment column, an additional indica- tor may appear or disappear in those columns as well. Important: When the current segment ends, the treadmill will automatically adjust to the speed and incline settings for the next seg- ment.

To stop the program at any time, press the Stop button. The time will begin to flash in the display. To restart the program, press the Start button or the Speed increase button. The walking belt will begin to move at 2 km/h. When the next segment of the program begins, the treadmill will automatically ad- just to the speed and incline settings for the next segment.

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Model No. PATL40706.0 Serial No QUESTIONS?Table of Contents Important Precautions Page Before YOU Begin Make sure that the power cord is unplugged AssemblyHarness 77 fall into the Right Handrail Do not tighten the Screws yetConnectors should slide together easily Both Handrail Bolts and then firmly tighten ThemConnect the console. See the inset drawing No Screws Ing the Shock Pin HOW to Fold and Move the TreadmillOperation and Adjustment HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt Features of the Console Console DiagramHOW to USE the Manual Mode HOW to Turn on the PowerTurn on the fan if desired Measure your heart rate if desiredSelect a trainer program HOW to USE a Trainer ProgramHOW to USE a Heart Rate Program Put on the chest pulse sensorSelect a heart rate program See on HOW to Connect Your MP3 Player or CD Player HOW to Connect Your Portable StereoAudio Cable HOW to Connect Your Computer HOW to Connect Your Home StereoHOW to Connect Your VCR See on Follow the on-line instructions to start the program Optional Chest Pulse Sensor Information ModeSecurely by the latch pin HOW to Fold and Move the TreadmillHOW to Fold the Treadmill for Storage HOW to Move the TreadmillHOW to Lower the Treadmill for USE Problem The power turns off during use TroubleshootingTop Problem The walking belt slows when walked onExercise Frequency Exercise GuidelinesExercise Intensity Workout GuidelinesSuggested Stretches Key No. Qty Description Part LIST-Model No. PATL40706.0Page PATL40706.0 R1207A 103 104 106 112 109 Ordering Replacement Parts Limited WarrantyIcon Authorized Dealer

485CX specifications

The ProForm 485CX is an impressive elliptical machine designed for home fitness enthusiasts seeking a full-body workout experience. This model stands out for its blend of advanced features, cutting-edge technologies, and durable characteristics, making it a popular choice among users of varying fitness levels.

One of the most notable features of the ProForm 485CX is its adjustable stride length, which lets users customize their workout intensity according to personal preferences and fitness goals. The machine offers a 16-inch stride length, providing a comfortable range of motion for a smooth and effective workout. This adaptability ensures that both novice and experienced users can benefit from an optimal elliptical experience.

Incorporating ProForm's innovative technology, the 485CX is equipped with a built-in digital display that tracks essential workout metrics such as time, speed, distance, calories burned, and heart rate. This real-time feedback empowers users to monitor their performance and progress, making it easier to stay motivated and focused on fitness objectives. Additionally, the machine features heart rate monitoring grips, ensuring that users can easily track their heart rates to maintain the desired intensity level throughout their workouts.

The ProForm 485CX also offers a variety of workout programs designed to cater to different fitness levels and goals. With pre-set training programs, users can engage in customized routines that focus on endurance, weight loss, toning, and more. This versatility encourages users to diversify their workouts and prevent boredom, ultimately enhancing their fitness journey.

Another notable characteristic of the ProForm 485CX is its ergonomic design, which includes cushioned pedals to minimize the impact on joints while exercising. This feature is particularly beneficial for users with joint concerns or those new to fitness, as it allows for a low-impact workout that is easier on the body.

Moreover, the machine's sturdy construction promises long-term durability, making it a reliable addition to any home gym. The ProForm 485CX is also relatively compact, allowing it to be placed in smaller spaces without compromising on functionality.

In conclusion, the ProForm 485CX is an excellent fitness equipment choice for those looking to achieve their health and wellness goals from the comfort of home. With its adjustable stride length, digital tracking, diverse workout programs, ergonomic features, and robust design, the 485CX stands as a testament to ProForm’s commitment to quality and innovation in fitness technology.
Top Page Image Contents