Assembly

Assembly requires two persons.

Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until you complete all assembly steps.

To identify small parts, see page 5.

. Orient the Rear Stabilizer (14) as shown. While

a second person lifts the rear of the Frame (1), insert the Rear Stabilizer into the Frame.

Attach the Rear Stabilizer (14) with four M8 x 60mm Button Screws (43).

. Orient the Front Stabilizer (2) as indicated by the sticker.

While a second person lifts the front of the Frame (1), attach the Front Stabilizer (2) to the Frame with two M10 x 80mm Button Screws (36).

In addition to the included tool(s), assembly requires the following tools:

one Phillips screwdriver (]_z;======_

one adjustable wrench

Assembly may be easier if you have your own set of wrenches. To avoid damaging parts, do not use power tools.

141.-.