ProForm PFBE3006.0 user manual

Page 6

2.Attach the remaining Bench Foot (15) to the Center Seat Base (1) with two M4 x 16mm Self- tapping Screws (91) and two M4 Washers (84).

3.Insert two M10 x 100mm Screws (26) up through the Base Plate (34), the Center Seat Base (1), and the Right and Left Seat Bases (2, 3).

Attach the Right and Left Seat Bases (2, 3) to the Center Seat Base (1) with two M10 x 58mm Button Bolts (95) and two M10 Nylon Locknuts (77).

4.Attach the Seat Frame (5) to the Center Seat Base (1) with the indicated two M10 x 100mm Screws (26).

2
15	1
84
84
91
3
2
95
1
	3
34	77
26
4
5
	26
1
	26

6

Image 6

Contents QUESTIONS? Model No. PFBE3006.0 Serial NoCall TOLL-FREE Table of Contents Important Precautions Right Side Assembled DimensionsBefore YOU Begin Left SideAssembly Make Assembly EasierPage Page Page Repeat this step with the Right Rack Base Locknuts yetLocknut yet the Stop Hook should pivot easily Repeat this step with the left Guide Rod not shownRepeat this step with the other Front Upright not shown Do not tighten the Nylon Locknuts yetMake sure that the Barbell is centered Page Adjustments Adjusting the BackrestAttaching the Curl PAD Attaching the Barbell Adapters Attaching AccessoriesAdding Weight Repeat this process on the other side of the BarbellAdjusting the Barbell Stops Using the BarbellAdjusting the Cable Cable Diagram Exercise Guidelines Muscle Chart Cooling DownStaying Motivated Part Identification Chart Part LIST-Model No. PFBE3006.0 Key No. Qty DescriptionR0706A 8382 Ordering Replacement Parts Limited WarrantyIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT