24.Route the Cable (61) under a Pulley (63). Attach the Pulley, a Cable Trap (66), and two Half Finger Guards (65) to the two Pulley Plates (35) with an M10 x 50mm Bolt (79) and an M10 Nylon Locknut (77). Make sure that the Cable Trap is oriented to hold the Cable in the groove of the Pulley.
25.Route the Cable (61) over a Pulley (63). Attach the Pulley inside the Top Frame (45) with an M10 x 78mm Bolt (87) and an M10 Nylon Locknut (77).
26.Attach the Cable (61) to the M10 x 20mm Bolt (89) with an M10 Nylon Locknut (77). Make sure that the Cable can pivot easily on the Bolt.
27.Route the second Cable (61) under a Pulley (63). Attach the Pulley to the Center Rack Base (39) with an M10 x 45mm Bolt (75) and an M10 Nylon Locknut (77).
28.Route the Cable (61) over a Pulley (63). Attach the Pulley, a Cable Trap (66), and two Half Finger Guards (65) to the two Pulley Plates (35) at the indicated hole with an M10 x 50mm Bolt (79) and an M10 Nylon Locknut (77). Make sure that the
Cable Trap is oriented to hold the Cable in the groove of the Pulley.
24 |
|
|
77 | 61 |
|
|
| |
| 63 |
|
65 | 65 |
|
|
| |
35 | 66 | 79 |
|
| |
| 35 |
|
25 |
|
|
77 | 45 |
|
87 |
| |
|
| |
| 63 |
|
| 61 |
|
26 |
|
|
| 61 |
|
77 | 89 |
|
|
| |
27 |
|
|
77 | 63 |
|
61 |
| |
75 |
| |
|
| |
| 39 |
|
28 |
|
|
77 | 35 |
|
|
| |
65 | 65 |
|
66 | 79 |
|
63 |
| |
|
| |
| 61 |
|
13 |
|
|