5.Attach the Backrest (11) to the Backrest Frame
(8) with four M6 x 25mm Button Screws (17).
6.Apply a small amount of the included grease to an M10 x 87mm Button Bolt (94). Attach the Backrest Frame (8) to the Seat Frame (5) with the Button Bolt and an M10 Nylon Locknut (77).
Do not overtighten the Nylon Locknut; the Backrest Frame should pivot easily.
Engage the Backrest Knob (22) into one of the holes in the Backrest Frame (8), and fully tighten the Backrest Knob into the Seat Frame (5).
7.Attach the Seat Bumper (27) to the Seat Frame
(5) with an M4 x 16mm
Apply grease to the barrel of an M10 x 70mm Bolt Set (93). Attach the Leg Lever (6) to the Seat Frame (5) with the Bolt Set. Make sure that the barrel of the Bolt Set is inserted through both sides of the bracket on the Seat Frame. Do not overtighten the Bolt Set; the Leg Lever must pivot easily.
5 |
|
|
|
11 |
|
|
|
|
|
| 17 |
|
|
| 8 |
|
| 17 |
|
6 |
|
|
|
Grease | 94 | 8 |
|
|
| ||
22 |
| 77 |
|
|
|
| |
5 |
|
|
|
7 |
|
|
|
| Grease | 5 | |
| 93 |
| |
|
|
| |
6 |
|
| 93 |
|
| 27 | |
| 91 |
| |
| 84 |
| |
7