ProForm PFBE3006.0 user manual Repeat this step with the Right Rack Base, Locknuts yet

Page 9

11.Attach the Left Rack Base (37) to the Center Rack Base (39) with two M10 x 67mm Bolts (86), an M10 Washer (80), and an M10 Nylon Locknut (77). Do not tighten the Bolts yet.

Repeat this step with the Right Rack Base (38).

12.Attach the Rear Rack Base (40) to the Rear Upright (41) with two M10 x 67mm Bolts (86), two M10 Washers (80), and an M10 Nylon Locknut (77). Do not tighten the Bolts yet.

13.Attach the Foot Plate (49) and the Rear Rack Base (40) to the Center Rack Base (39) with two M10 x 63mm Button Bolts (90) and two M10 Nylon Locknuts (77). Do not tighten the Nylon

Locknuts yet.

Attach the Foot Plate (49) to the Center Rack Base (39) with an M10 x 63mm Button Bolt (90), an M10 Washer (80), and an M10 Nylon Locknut (77). Do not tighten the Nylon Locknut yet.

11
	86
38	80
39
77
37
12
41	86
41
77
40	80
40
13
80	77
	40
	77
90
39
90
49

9

Image 9

Contents QUESTIONS? Model No. PFBE3006.0 Serial NoCall TOLL-FREE Table of Contents Important Precautions Before YOU Begin Assembled DimensionsRight Side Left SideMake Assembly Easier AssemblyPage Page Page Locknuts yet Repeat this step with the Right Rack BaseRepeat this step with the left Guide Rod not shown Locknut yet the Stop Hook should pivot easilyDo not tighten the Nylon Locknuts yet Repeat this step with the other Front Upright not shownMake sure that the Barbell is centered Page Adjustments Adjusting the BackrestAttaching the Curl PAD Adding Weight Attaching AccessoriesAttaching the Barbell Adapters Repeat this process on the other side of the BarbellAdjusting the Barbell Stops Using the BarbellAdjusting the Cable Cable Diagram Exercise Guidelines Muscle Chart Cooling DownStaying Motivated Part Identification Chart Key No. Qty Description Part LIST-Model No. PFBE3006.0R0706A 8382 Ordering Replacement Parts Limited WarrantyIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT