ASSEMBLY
Make Assembly Easier
Everything in this manual is designed to ensure that the weight bench can be assembled suc- cessfully by almost anyone. However, the weight bench has many parts and the assembly process will take time. By setting aside plenty of time, assembly will go smoothly.
To hire an authorized service technician to assemble the weight bench, call
Before beginning assembly, carefully read the following information and instructions:
•Because of its weight and size, the weight bench should be assembled in the location where it will be used. Make sure that there is enough clear- ance to walk around the weight bench as you assemble it.
•Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed.
•Tighten all parts as you assemble them, unless instructed to do otherwise.
•As you assemble the weight bench, make sure all parts are oriented as shown in the drawings.
•Assembly requires two persons.
•For help identifying small parts, use the PART IDENTIFICATION CHART.
In addition to the included grease, assembly may require the following tools (not included):
• Two adjustable wrenches
• One rubber mallet
• One standard screwdriver
• One Phillips screwdriver
Assembly may be more convenient if you have a socket set, a set of
1.
Before beginning assembly, make sure that you have read and understand the informa- tion in the box above. See the PART IDENTI- FICATION CHART for help identifying small parts.
Attach the Support (5) to the Base (1) with an M10 x 55mm Button Screw (50) and two M10 x 80mm Button Screws (59).
Orient the Base Foot (22) with the grooves in the position shown. Attach the Base Foot to the Base
(1) with an M4 x 12mm
1
5
50
1
59
22
59
Grooves
61
6