ProForm PFEL03907.0 Shown make sure that the hexagonal holes, Left Upper Body Arm are in the indi

Page 10

9. Identify the Left Upper Body Arm (8), which is

marked with an “L” sticker. Orient the Left Upper

Body Arm and the left Upper Body Leg (6) as

shown; make sure that the hexagonal holes

in the Left Upper Body Arm are in the indi-

cated location.

Slide the Left Upper Body Arm (8) onto the left

Upper Body Leg (6). Attach the Left Upper Body

Arm with two M6 x 36mm Button Bolts (76) and

two M6 Nylon Locknuts (77); make sure that

the Nylon Locknuts are inside the hexagonal

holes.

Repeat this step for the Right Upper Body

9

8

9

77

76

Arm (9) and the right Upper Body Leg (6).

Hexagonal

Holes

76

6

77

10.Apply a generous amount of the included grease to the Pivot Axle (16). Then, apply a small amount of grease to two Wave Washers (88).

Insert the Pivot Axle (16) into the Upright (2). Slide a Wave Washer (88) onto each end of the Pivot Axle.

Slide the left Upper Body Leg (6) onto the Pivot Axle (16). Attach the left Upper Body Leg with an M6 x 16mm Patch Screw (80) and a Large Axle Cover (20). Attach the right Upper Body

Leg (6) in the same way.

	10
	80	2
	80
	20
		16
	6	88
	6	20
		20
		80
		88
		Grease
		6

10

Image 10

Contents Model No. PFEL03907.0 Serial No QUESTIONS?Call TOLL-FREE Table of Contents Important Precautions Before YOU Begin Assembly Repeat this step to attach the other Frame Cover Repeat this step to attach the other WheelHarness Avoid pinchingDuring this step Tip Be careful not to pinch the wires during this step Avoid pinching Wires during This stepRepeat this step on the right side Elliptical exerciser Cated location Shown make sure that the hexagonal holesLeft Upper Body Arm are in the indi Nylon Locknuts are inside the hexagonalPage HOW to Move the Elliptical Exerciser HOW to USE the Elliptical ExerciserHOW to Exercise on the Elliptical Exerciser HOW to Adjust the Stride of the Elliptical Exerciser Console Diagram Features of the Console Select the manual mode HOW to USE the Manual ModeUpper display Turn on the fan if desired HOW to USE a Preset Workout Turn on the console. See on Select a preset workoutHandgrip Pulse Sensor Troubleshooting Maintenance and TroubleshootingBattery Replacement HOW to Adjust the Reed SwitchWorkout Guidelines Exercise GuidelinesExercise Intensity Exercise FrequencyPart LIST-Model No. PFEL03907.0 Key No. Qty DescriptionQty Description Drawing Model No. PFEL03907.0 Limited Warranty Ordering Replacement PartsIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT