Assembly

To hire an authorized service technician to assemble the elliptical exerciser, call 1-800-445-2480.

Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed.

Assembly requires the included hex keys and your own Phillips screwdriver ,

adjustable wrench , and rubber mallet .

As you assemble the elliptical exerciser, use the drawings below to identify small parts. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the parentheses is the quantity needed for assembly. Note: Some small parts may have been pre- assembled. If a part is not in the parts bag, check to see if it has been pre-assembled.

M6 Nylon	Wave Washer	M10 Split	M10 x 20mm Patch	M10 x 35mm Shoulder
Locknut (77)–4	(88)–2	Washer (78)–10	Screw (79)–4	Screw (63)–2
M4 x 12mm	M4 x 16mm		M4 x 16mm	M4 x 32mm Screw
Screw (99)–4	Screw (84)–10		Round Head	(95)–2
			Screw (94)–4
M6 x 16mm Patch	M6 x 36mm Button		M10 x 70mm Button Screw (75)–6
Screw (80)–6	Bolt (76)–4		M10 x 70mm Button Screw (75)–6