ProForm PFEL03907.0 user manual HOW to Adjust the Stride of the Elliptical Exerciser

Page 13

HOW TO ADJUST THE STRIDE OF THE ELLIPTICAL EXERCISER

To adjust the stride of the elliptical exerciser, first pull one of the adjustment knobs until the adjustment bracket pivots freely. Pivot the adjustment bracket until the adjustment knob is aligned with one of the two holes in the crank arm, and gently release the knob. Then, pivot the adjustment bracket back and forth slightly to make sure that the adjustment pin is engaged in one of the holes in the crank arm.

Adjust the other side of the elliptical exerciser in the same way.

Adjustment

Pin

Adjustment

Bracket

Crank

Arm

Adjustment

Knob

Holes

13

Image 13

Contents Model No. PFEL03907.0 Serial No QUESTIONS?Call TOLL-FREE Table of Contents Important Precautions Before YOU Begin Assembly Repeat this step to attach the other Wheel Repeat this step to attach the other Frame CoverHarness Avoid pinchingDuring this step Avoid pinching Wires during This step Tip Be careful not to pinch the wires during this stepRepeat this step on the right side Elliptical exerciser Left Upper Body Arm are in the indi Shown make sure that the hexagonal holesCated location Nylon Locknuts are inside the hexagonalPage HOW to Move the Elliptical Exerciser HOW to USE the Elliptical ExerciserHOW to Exercise on the Elliptical Exerciser HOW to Adjust the Stride of the Elliptical Exerciser Console Diagram Features of the Console Select the manual mode HOW to USE the Manual ModeUpper display Turn on the fan if desired Turn on the console. See on Select a preset workout HOW to USE a Preset WorkoutBattery Replacement Maintenance and TroubleshootingHandgrip Pulse Sensor Troubleshooting HOW to Adjust the Reed SwitchExercise Intensity Exercise GuidelinesWorkout Guidelines Exercise FrequencyKey No. Qty Description Part LIST-Model No. PFEL03907.0Qty Description Drawing Model No. PFEL03907.0 Limited Warranty Ordering Replacement PartsIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT