ProForm PFEL03907.0 user manual

Page 11

11. Apply a small amount of grease to a Pedal Arm

11

 

Axle (21). While another person holds the right

 

 

 

Pedal Arm (14) inside the bracket on the right

 

6

Upper Body Leg (6), insert the Pedal Arm Axle

 

80

 

through the Upper Body Leg and the Pedal

Grease

 

Arm.

22

21

 

 

22

Then, tighten an M6 x 16mm Patch Screw (80)

 

 

80

and an Axle Cover (22) into each end of the

 

 

 

Pedal Arm Axle (21).

 

 

Repeat this step for the other side of the

14

 

elliptical exerciser.

 

12.Make sure that all parts of the elliptical exerciser are properly tightened. Note: Some hardware may be left over after assembly is completed. To protect the floor or carpet from damage, place a mat under the elliptical exerciser.

11

Image 11
Contents Call TOLL-FREE QUESTIONS?Model No. PFEL03907.0 Serial No Table of Contents Important Precautions Before YOU Begin Assembly Repeat this step to attach the other Wheel Repeat this step to attach the other Frame CoverDuring this step Avoid pinchingHarness Avoid pinching Wires during This step Tip Be careful not to pinch the wires during this stepRepeat this step on the right side Elliptical exerciser Nylon Locknuts are inside the hexagonal Shown make sure that the hexagonal holesLeft Upper Body Arm are in the indi Cated locationPage HOW to Exercise on the Elliptical Exerciser HOW to USE the Elliptical ExerciserHOW to Move the Elliptical Exerciser HOW to Adjust the Stride of the Elliptical Exerciser Console Diagram Features of the Console Upper display HOW to USE the Manual ModeSelect the manual mode Turn on the fan if desired Turn on the console. See on Select a preset workout HOW to USE a Preset WorkoutHOW to Adjust the Reed Switch Maintenance and TroubleshootingBattery Replacement Handgrip Pulse Sensor TroubleshootingExercise Frequency Exercise GuidelinesExercise Intensity Workout GuidelinesKey No. Qty Description Part LIST-Model No. PFEL03907.0Qty Description Drawing Model No. PFEL03907.0 Icon Health & FITNESS, INC., 1500 S W., LOGAN, UT Ordering Replacement PartsLimited Warranty