ProForm PFEL03907.0 user manual Repeat this step to attach the other Frame Cover

Page 6

1.

To make assembly easier, read the information on page 5 before you begin assembling the elliptical exerciser.

While another person lifts the rear of the Frame (1), attach a Frame Cover (48) to the Frame with two M4 x 16mm Screws (84).

Repeat this step to attach the other

Frame Cover (48).

2.Attach a Wheel (50) to the front of the Frame (1) with an M10 x 35mm Shoulder Screw (63).

Repeat this step to attach the other Wheel (50).

1
	48
	84	48
		1
		84
2	63
	63
	50
		1
		50
		63

6

Image 6

Contents QUESTIONS? Model No. PFEL03907.0 Serial NoCall TOLL-FREE Table of Contents Important Precautions Before YOU Begin Assembly Repeat this step to attach the other Frame Cover Repeat this step to attach the other WheelAvoid pinching HarnessDuring this step Tip Be careful not to pinch the wires during this step Avoid pinching Wires during This stepRepeat this step on the right side Elliptical exerciser Cated location Shown make sure that the hexagonal holesLeft Upper Body Arm are in the indi Nylon Locknuts are inside the hexagonalPage HOW to USE the Elliptical Exerciser HOW to Move the Elliptical ExerciserHOW to Exercise on the Elliptical Exerciser HOW to Adjust the Stride of the Elliptical Exerciser Console Diagram Features of the Console HOW to USE the Manual Mode Select the manual modeUpper display Turn on the fan if desired HOW to USE a Preset Workout Turn on the console. See on Select a preset workoutHandgrip Pulse Sensor Troubleshooting Maintenance and TroubleshootingBattery Replacement HOW to Adjust the Reed SwitchWorkout Guidelines Exercise GuidelinesExercise Intensity Exercise FrequencyPart LIST-Model No. PFEL03907.0 Key No. Qty DescriptionQty Description Drawing Model No. PFEL03907.0 Ordering Replacement Parts Limited WarrantyIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT