ProForm PFEL03907.0 user manual Repeat this step on the right side Elliptical exerciser

Page 9

7. Slide the Console Cover (96) (see the drawing	7
in step 6) upward to the Console (4). Attach the	7
in step 6) upward to the Console (4). Attach the
Console Cover with four M4 x 16mm Round
Head Screws (94).
		4
		96
		94
		94
8. Attach the Left Pedal (12) to the left Pedal Arm	8
(14) with three M10 x 70mm Button Screws	8
(14) with three M10 x 70mm Button Screws
(75), three M10 Split Washers (78), and an M4
x 16mm Screw (84).	14
	14
Repeat this step on the right side of the
elliptical exerciser.
		78
	12
	78	75
	78
	84
	9

Image 9

Contents QUESTIONS? Model No. PFEL03907.0 Serial NoCall TOLL-FREE Table of Contents Important Precautions Before YOU Begin Assembly Repeat this step to attach the other Wheel Repeat this step to attach the other Frame CoverAvoid pinching HarnessDuring this step Avoid pinching Wires during This step Tip Be careful not to pinch the wires during this stepRepeat this step on the right side Elliptical exerciser Left Upper Body Arm are in the indi Shown make sure that the hexagonal holesCated location Nylon Locknuts are inside the hexagonalPage HOW to USE the Elliptical Exerciser HOW to Move the Elliptical ExerciserHOW to Exercise on the Elliptical Exerciser HOW to Adjust the Stride of the Elliptical Exerciser Console Diagram Features of the Console HOW to USE the Manual Mode Select the manual modeUpper display Turn on the fan if desired Turn on the console. See on Select a preset workout HOW to USE a Preset WorkoutBattery Replacement Maintenance and TroubleshootingHandgrip Pulse Sensor Troubleshooting HOW to Adjust the Reed SwitchExercise Intensity Exercise GuidelinesWorkout Guidelines Exercise FrequencyKey No. Qty Description Part LIST-Model No. PFEL03907.0Qty Description Drawing Model No. PFEL03907.0 Ordering Replacement Parts Limited WarrantyIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT