HOW to USE a Preset Workout

1.Turn on the console. See step 1 on page 15.

2.Select a preset workout.

To select a preset workout, press the Workout Select button repeatedly until the number 1, 2, 3, 4, 5, or 6 appears in the upper display.

3.Press the Workout Start button or begin pedal- ing to start the workout.

Each workout is divided into 20, 30, or 45 one- minute segments. One resistance level and one target pace setting are programmed for each seg- ment. Note: The same resistance level and/or target pace setting may be programmed for two or more consecutive segments.

During the workout, you will also be prompted to keep your pedaling pace near the target pace set- ting for the current segment. When the GO FASTER indicator is lit, increase your pace. When the GO SLOWER indicator is lit, decrease your pace. When the center indicator is lit, maintain your current pace. IMPORTANT: The target pace settings are intended only to provide motiva- tion. Make sure to pedal at a pace that is com- fortable for you.

If the resistance level for the current segment is too high or too low, you can manually override the setting by pressing the decrease and increase but- tons. However, when the current segment ends, the pedals will automatically adjust to the resis- tance level for the next segment.

If you stop pedaling for several seconds, the work- out will pause, and the time will flash in the display. To restart the workout, simply resume pedaling.

The workout will continue until the last segment of the workout ends.

4.Follow your progress with the displays. See step 4 on page 15.

5.Measure your heart rate if desired. See step 5 on page 16.

6.Turn on the fan if desired. See step 6 on page 16.

7.When you are finished exercising, the console will turn off automatically.

See step 7 on page 16.