ProForm PFSY3415.0 user manual

Page 6

2.Press the 110mm Round Inner Cap (42) into the Upright (3).

Set the Upright (3) onto the Base (1). Have a sec- ond person hold the Upright until this step is com- pleted.

Attach the Upright (3) to the Base (1) with the three M8 x 45mm Bolts (57), three M8 Nylon Locknuts (74), and four M10 x 25mm Screws (58).

3.Attach the Base Plate (2) to the Base (1) with the four M4 x 40mm Screws (46), and two M4 x 64mm Screws (81).

2	42
	42
	3
	58
	58
74	57
74	1
57
3
	2
	1
46	81
46
46
81
	46

6

Image 6

Contents QUESTIONS? Model No. PFSY3415.0 Serial NoCall TOLL-FREE Table of Contents Important Precautions Before YOU Begin Right SideLeft Side Assembly Make Things Easier for YourselfPage Insert the Weight Tube 11 into a Weight Engage the VKR Pin 101 into the VKR Frame Upright Grease Repeat this step with the other Pull-up Handle Arm Cable 30 is routed under the indicated welded rods Page Page Repeat this step on the other side of the VKR Frame Adjustments Attaching the Pulley HousingsRemove the Pulley Housings 32 when not in use Locking the Weight Stack Adjusting the Seat Frame HeightChanging the Weight Setting Attaching the HandlesAttaching the Curl PAD Adjusting the VKR FrameAttaching the LEG Lever Attaching the Curl BARWeight Resistance Cable DiagramWeight Resistance Chart Press Arm CableExercise Guidelines Muscle Chart Cooling DownStaying Motivated Part Identification Chart Part LIST-Model No. PFSY3415.0 Qty DescriptionR0805A Exploded Drawing B-Model No. PFSY3415.0 Ordering Replacement Parts Limited WarrantyIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT