6. Slide three M6 Washers (78) onto three M6 x | 6 |
|
140mm Screws (79) and insert the Screws into |
| |
|
| |
the Upright (3) through the indicated holes. |
|
|
Orient the VKR Bumper (95) with the wide end on |
|
|
top. Attach the VKR Bumper to the Upright (3) |
|
|
with two M4 x 16mm Screws (70). |
|
|
Attach the VKR Pin (101) to the Upright (3) with |
|
|
an M4 x 16mm Screw (70). | 79 |
|
| Wide | |
Set the Shroud (13) onto the Base (1). Attach the | 78 | End |
Bottom Cover (14) and the Shroud to the Base |
| 70 |
with two M4 x 16mm Screws (70). |
| 95 |
|
| |
| 3 | 101 |
| 13 | |
| 79 | |
|
| |
| 78 | 70 |
|
| |
|
| 70 |
|
| 14 |
|
| 70 |
|
| 1 |
7. Grease the M10 x 168mm Button Bolt (99). | 7 |
|
Attach the VKR Frame (82) to the Upright (3) with |
| |
|
| |
the Bolt and an M10 Nylon Locknut (73). Do not |
|
|
overtighten the Locknut; the VKR Frame must |
|
|
be able to pivot easily. |
|
|
Engage the VKR Pin (101) into the VKR Frame |
|
|
(82) and the Upright (3). |
|
|
|
| 82 |
|
| 73 |
|
| Grease |
| 3 | 99 |
|
| |
|
| 101 |
8