ASSEMBLY
Place all parts of the exercise cycle in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed.
Assembly requires the included tools and your own adjustable wrench .
Refer to the drawings below to identify the small parts needed for assembly. The number in parenthesis below each drawing is the key number of the part, from the PART LIST on page 22. The number following the key number is the quantity needed for assembly. Note: Some small parts may have been
M6 Washer | M8 Split | M8 Flat | M8 Nylon | M10 Nylon |
Washer | Washer | Locknut | Locknut | |
M4 x 16mm | M4 x 21mm | M6 x 16mm | M8 x 19mm Button | M8 x 25mm Button |
Screw | Screw | Screw | Bolt | Screw |
M8 x 39mm Button | 1/4” x 16mm Hex | 1/4” x 38mm Hex | ||
Bolt | Screw |
| Screw | |
|
| M10 x 91mm Carriage Bolt |
| |
|
| M10 x 105mm Carriage Bolt |
| |
|
| 5 |
|
|