JVC RX-DP9VBK manual Turning On and Off the Video Output -VIDEO Power, To recall the volume level

Turning On and Off the Video Output —VIDEO POWER (9)

		On this submenu screen, you can
VIDEO POWER
		turn on or off the power supply
VIDEO POWER : ON
		to the video output circuit built
	:OPERATE	in this unit.
	:BACK

7Turning on or off the power supply to the video circuit

Select one of the following:

ON : Normally select this.

Power is supplied to the built-in video output circuit.

OFF : Select this not to supply power to the built-in video output circuit while playing an audio source.

With this setting, noise will be reduced while playing an audio source.

Note:

Even if “VIDEO POWER” is set to “OFF,” power will be supplied to

the video circuit when on-screen display menus are used.

Showing the Text Information on the Display—FL DISPLAY (p)

Memorizing the Volume Level for Each Source—ONE TOUCH OPE(ration) (q)

		This unit memorizes many
ONE TOUCH OPE
		settings separately for each
ONE TOUCH OPE : OFF		source. (See page 23.)
	:OPERATE	In addition, you can store the
	:BACK	volume level for each source
		together with the other
		memorized settings.

7Storing the volume level for each source

Select one of the following:

ON	: Select this to store the volume level setting
	separately for each source. (The ONE TOUCH
	OPERATION indicator lights up on the main unit’s
	display.)

This receiver memorizes the volume level—

•when you turn off the power,

•when you change the source,

•when you change the analog/digital input mode (see page 20), and

•when you turn on One Touch Operation.

OFF : Select this not to store the volume level setting.

To recall the volume level

With the ONE TOUCH OPERATION indicator lit, the volume level for the currently selected source is recalled when the source is

FL DISPLAY

FL DISPLAY : TEXT

:OPERATE :BACK

When you have connected an MD recorder or CD player equipped with TEXT COMPU LINK remote control system (see page 48), you can show the text information, such as disc title or track title, on the display of this receiver.

selected.

To cancel the One Touch Operation

Set One Touch Operation to “OFF” so that the ONE TOUCH OPERATION indicator goes off.

7Turning on or off the text information display

Select one of the following:

NORMAL: Source name and Surround/DSP mode appear during play.

TEXT : Text information appears during play.

Note:

Though you have selected “TEXT,” the source name and Surround/ DSP mode will appear while playing a disc that has no text information.

33