JVC RX-DP9VBK manual Specifications, Amplifier, Audio

Page 66

Specifications

Amplifier

Output Power

At Stereo operation:

Front channels: 120 W per channel, min. RMS, driven into 8 Ω, 20 Hz to 20 kHz with no more than 0.02% total harmonic distortion.

120 W per channel, min. RMS, driven into 4 Ω, 20 Hz to 20 kHz with no more than 0.08% total harmonic distortion.

At Surround operation:

 

 

Front channels:

100 W per channel, min. RMS, driven into 8 Ω, 20 Hz to 20 kHz with no more

 

than 0.02% total harmonic distortion.

Center channel:

100 W, min. RMS, driven into 8 Ω, 20 Hz to

 

20 kHz with no more than 0.02% total harmonic distortion.

Surround channels:

100 W per channel, min. RMS, driven into 8 Ω, 20 Hz to 20 kHz with no more

 

than 0.02% total harmonic distortion.

Audio

 

 

Audio Input Sensitivity/Impedance (1 kHz):

PHONO (MM): 2.5 mV/47 kΩ

 

CD, CDR, TAPE/MD, DVD, VCR 1, VCR 2, VIDEO, TV SOUND/DBS: 200 mV/47 kΩ

Audio Input (DIGITAL IN)* :

Coaxial:

DIGITAL 1 (DVD): 0.5 V(p-p)/75 Ω

 

Optical:

DIGITAL 2 (CD) / 3(TV) / 4(CDR):

 

 

–21 dBm to –15 dBm (660 nm ±30 nm)

 

* Corresponding to Linear PCM, Dolby Digital, and DTS Digital Surround (with

 

sampling frequency — 32 kHz, 44.1 kHz, 48 kHz)

Audio Output Level:

PREOUT: 1 V

 

Recording Output Level:

TAPE/MD, CDR, VCR 1, VCR 2: 200 mV

Digital output:

Optical:

DIGITAL OUTPUT

 

Signal wave length: 660 nm

 

Output level:

–21 dBm to –15 dBm

Signal-to-Noise Ratio (’66 IHF/’78 IHF):

PHONO: 70 dB/78 dB (at REC OUT)

 

CD, CDR, TAPE/MD, DVD, VCR 1, VCR 2, VIDEO, TV SOUND/DBS:

 

92 dB/80 dB (Line Direct On)

Frequency Response (8 Ω):

PHONO: 20 Hz to 20 kHz (±1 dB)

 

CD, CDR, TAPE/MD, DVD, VCR 1, VCR 2, VIDEO, TV SOUND/DBS:

 

10 Hz to 100 kHz (+1 dB, –3 dB)

RIAA Phono Equalization:

±1.0 dB (20 Hz to 20 kHz)

Video

 

 

Video Input Sensitivity/Impedance:

 

 

Composite video:

DVD, VCR 1, VCR 2, VIDEO,

 

TV SOUND/DBS: 1 V(p-p)/75 Ω

S-video:

DVD, VCR 1, VCR 2, VIDEO, TV SOUND/DBS:

 

(Y: luminance): 1 V(p-p)/75Ω

 

(C: chrominance, burst): 0.286 V(p-p)/75 Ω

Component:

COMPONENT 1(DVD) / COMPONENT 2

 

(Y: luminance):

1 V(p-p)/75 Ω

 

(PB/CB, PR/CR):

±0.7 V/75 Ω

Video Output Level:

VCR 1, VCR 2, MONITOR OUT: 1 V(p-p)/75 Ω

Composite video:

S-video:

VCR 1, VCR 2, MONITOR OUT:

 

(Y: luminance): 1 V(p-p)/75 Ω

 

(C: chrominance, burst): 0.286 V(p-p)/75 Ω

Component:

MONITOR OUT

 

 

(Y: luminance): 1 V(p-p)/75 Ω

 

(PB/CB, PR/CR): ±0.7 V/75 Ω

Synchronization:

Negative

 

Signal-to-Noise Ratio:

45 dB

 

63

Page 65 Page 67
Image 66
Page 65 Page 67
Contents RX-DP9VBK Cautio -- STANDBY/ON switch 21.1 kg / 47 lbPage Table of Contents Features PrecautionsIntroduction Display Window Parts IdentificationFront Panel For more details, seeSurround/DSP mode indicators Analog indicatorDigital Auto indicator Tuned indicatorLights up when transmitting the remote control signals Remote ControlSignal transmission indicator Setup MENU, Adjust MENU, SET, EXIT, %UP DOWN, @LEFT, #RIGHTChecking the Supplied Accessories Before InstallationConnecting the FM and AM Antennas Getting StartedTurn the loop until you have the best reception Connecting the SpeakersAM Antenna Connections Speaker layoutConnecting the subwoofer speaker Basic connecting procedureConnecting the surround back speakers Important for the Front 1 Speakers connectionAnalog Connections Connecting Audio/Video ComponentsEnhance your audio system TurntableCD player CD recorderCassette deck or MD recorder VCRs VHS or VHS VCRVideo camera TV and/or DBS tuner DBS tunerDVD player Digital Connections Digital input terminalsDigital output terminal Plug the power cord into an AC outlet Connecting the Power CordPutting Batteries in the Remote Control Replace the coverSimple Operating Procedure Basic OperationsTurning the Power On and Off Standby Selecting the Source to PlayPicture from a video component Speaker and signal indicators on the displayFront door while viewing Press one of the source selecting buttonsAdjusting the Volume Activating the Front Speakers Analog indicator lights up Selecting the Analog or Digital Input ModeSelect this for the analog input mode Before you start, rememberAttenuating the Input Signal Turning Line Direct On and OffMuting the Sound Making Sounds Natural Changing the Source NameChanging the Display Brightness When the shut-off time comes Using the Sleep TimerBasic adjustment auto memory To cancel the Sleep TimerPress FM or AM Tuning into Stations ManuallyReceiving Radio Broadcasts Press UP or Down insideUsing Preset Tuning Selecting the FM Reception ModeBasic Settings Setup Menu ConfigurationOperation through On-Screen Display Menus Menu operation buttonsButton To do Press SET Menu Operating ProcedurePress Setup Menu Set other items on the same submenu if necessaryFor subwoofer Select this when a subwoofer is connectedSelect this when no subwoofer is used For measuring unitSetting the Bass Sounds-SUBWOOFER Setting the Dynamic Range -DYNAMIC Range Setting the Surround Sound Output -SURROUND SpeakerPreparing for THX Surround Modes-THX Setting the component video input terminals Setting the Digital Input Terminals -DIGITALSetting the component connected to the digital Preparing for the Component Video Input -COMPONENTTo recall the volume level Turning On and Off the Video Output -VIDEO PowerSelect this not to store the volume level setting To cancel the One Touch OperationSound Adjustments Adjustment Menu ConfigurationEx. When you press Adjust Menu Adjust MenuOn the front panel Press Adjust Menu Ex.When adjusting a DSP parameterWhen adjusting the parametric equalizer Adjusting the Speaker Channel Output Levels-LEVEL Adjusting the Parametric Equalizer -PARAMETRIC EQAdjusting the DSP Parameters -DSP Parameter Adjusting the Center Channel -CENTER ChannelIntroducing the Surround Modes Using the Surround ModesReproducing Theater Ambience THX Surround EX Dolby Digital EXDolby Surround Dolby Pro Logic 3D Headphone ModeDVD Multi Playback Mode DTS SurroundActivating the Surround Modes To cancel the THX SurroundTo cancel the conventional Surround mode Select and play one of the following sound sourcesAdjusting the Surround Sounds Temporarily Using the DSP Modes Reproducing the Sound FieldIntroducing the DSP Modes Activating the DSP Modes Headphone ModeWithout connecting the surround speakers If the center speaker is connected and activatedAdjusting the DSP Parameters Temporarily Ex. When you press DVD Multi Using the DVD Multi Playback ModeActivating the DVD Multi Playback Mode Press DVD Multi so that DVD Multi appears on the displayCompu Link Remote Control System Same timePress the play 3 button on the CD player Displaying the Disc Information on the TV screen Text Compu Link Remote Control SystemCD player MD recorder Disc Search Only for CD PlayerShowing the Disc Information on the TV Screen Ex. When you press Text DisplayPress Text Display while CD or MD is selected as the source Text display operation buttonsPress %/ Þto move to Performer Then press SET Press Text Display while CD is selected as the sourcePress %/ Þto move to SEARCH, then press Press SET againPress %/ Þto move To the genre you Want to search for Press %/ Þto move to SEARCH, then press SETPress %/ Þto move To GENRE, then Press SET On the SearchTo insert a space, press Press Text Display while MD is selected as the sourcePress %/ Þto move to the genre you want, then press SET To correct an incorrect characterConnections 2 Video Cable Connection AV Compu Link Remote Control SystemConnections 1 AV Compu Link Connection CaseOne-Touch Video Play Automatic Selection of TV’s Input ModeAutomatic Power On/Off One-Touch DVD PlayTuner Operating JVC’s Audio/Video ComponentsOperating Audio Components Sound control section AmplifierTurntable CD playerCD player-changer CD recorderOperating Video Components VCR VCR connected to the VCR 1 jacksDVD player Changing the Preset Signal Codes Operating Other Manufacturers’ EquipmentPress VCR Enter manufacturer’s code usingPress and hold VCR Buttons 1-9,Press and hold Audio on If there are more than one code listed for your brand of CDPress DVD Press CDManufactures codes for Catv converter Manufacturer Codes Manufactures codes for TV Manufacturer CodesManufactures codes for DBS tuner Manufacturer Codes Manufactures codes for VCR Manufacturer CodesTroubleshooting Problem Possible Cause SolutionSpecifications AmplifierAudio FM tuner IHF Tuning Range KHz to 1 710 kHz Usable SensitivitySignal-to-Noise Ratio 50 dB 100 mV/m AM tunerAuthorized Service Centers Limited Warranty 0701NHMMDWJEIN
Related manuals
Manual 70 pages 29.03 Kb

RX-DP9VBK specifications

The JVC RX-DP9VBK is an advanced audio receiver that combines versatility, high-quality sound, and an array of features aimed at enhancing your home entertainment experience. This model aligns itself with both audio enthusiasts and casual listeners, providing a robust platform for a range of audio sources.

One of the standout features of the RX-DP9VBK is its powerful amplification capabilities. It delivers an impressive output, allowing it to drive various types of speakers with ease, making it suitable for larger rooms or home theaters. The unit provides support for multiple speaker configurations, ensuring that users can tailor their sound environment according to their space and preferences.

The RX-DP9VBK boasts built-in Bluetooth technology, allowing for seamless streaming from smartphones, tablets, and other compatible devices. This feature enhances convenience, enabling users to enjoy their favorite music, podcasts, and audiobooks without the need for complex wiring. The receiver also supports a range of audio formats, ensuring compatibility with various digital sources.

Equipped with a high-quality FM/AM tuner, this receiver offers excellent radio reception, giving users access to their favorite stations. The automated preset feature simplifies the process of saving and retrieving channels, making it user-friendly. Additionally, the receiver provides multiple input options, including HDMI, optical, and analog outputs. This variety allows users to connect a wide array of devices, such as Blu-ray players, gaming consoles, and streaming boxes.

Another notable characteristic of the RX-DP9VBK is its user interface, designed for ease of navigation. The remote control provides quick access to essential settings, while the on-screen display ensures users can make adjustments effortlessly.

For enhanced sound control, the RX-DP9VBK incorporates several audio processing technologies, including equalization and surround sound modes. These features allow users to optimize audio output according to their listening preferences, whether enjoying music, watching movies, or playing video games.

In conclusion, the JVC RX-DP9VBK is an exceptional audio receiver that stands out for its combination of power, versatility, and user-friendly features. With its advanced connectivity options, superior sound quality, and a wide range of supported formats, it is an excellent choice for anyone looking to enhance their audio experience at home. Whether you’re a casual listener or an audiophile, the RX-DP9VBK caters to diverse needs, making it a noteworthy addition to any home entertainment setup.
Top Page Image Contents